 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Pumps 
Pumps move liquids. All process plants have pumps. The types of pumps include centrifugal, hydraulic, rotary, reciprocating, and vacuum pumps. The capacity of a pump is defined by the amount of fluid passing through the unit rated in GPM (Gallons per Minute), and the discharge pressure rated at Head Feet. The head is the height of the column of fluid that the pump can push. Types of pumps: - Centrifugal pumps - the most widely used pumps in processing plants are Centrifugal pumps. They consist of an impellor rotating within a casing
- Reciprocating pumps – positive displacement pumps that have a higher efficiency than centrifugal pumps. The classes of reciprocating pumps include piston pumps, plunger pumps, and diaphragm pumps.
- Rotary pumps - In rotary pumps mechanical displacement of the liquid is produced by rotation of one or more members within a stationary housing. This type of pump includes gear pumps that have two impellors in a housing for thicker liquids, Moyno pumps which are progressive cavity pumps, and screw pumps.
- Hydraulic pumps – designed to generate fluid power.
- Vacuum pumps - designed to pull vacuum.
- Water seal vacuum pumps (Nash, Kinney, SiHi) use water to create suction. These produce some vacuum with higher CFM flow.
- Oil seal vacuum pumps (Kinney, Stokes, Huckepack, Reictsche) provide very high vacuum
- Dry seal vacuum pumps (Busch) provide high vacuum
|
|
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 49 Items Returned | Go To Page: | 1 | 2 | 3 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 14585 | PUMP | HYDRAULIC | 10 | 10 HP Young hydraulic pump. Mdl P45/PSV251F10, SN P5393-2. Direct coupled to 10 HP, 3/60/460 volt, 1760 rpm TEFC motor. Rated 1000 psi, 10 HP, 45 gals. W/oil reservoir and controls. |
|
|
| 15679 | PUMP | HYDRAULIC | 3 | 3 HP hydraulic pump. With Link-belt speed reducer. Speed reducer rated 3 HP, 1750 rpm input, 68 rpm output. 25.6:1 ratio. No motor or reservoir tank with unit. |
|
|
| 36726 | PUMP | HYDRAULIC | 40 | 40 HP Sunstrand CS hydraulic pump. Mdl 2-2058, SN 09-PA67898. Driven by 40 HP, 3/60/230/460 volt, 1180 rpm motor. On stand. For centrifuge drive. |
|
|
| 42448 | PUMP | HYDRAULIC | 15 | 15 HP hydraulic unit. Driven by 15 HP, 3/60/460 volt, 1755 rpm TEFC motor. Skid mtd w/47" long x 12" wide x 28" high reservoir. |
|
|
| 42706 | PUMP | HYDRAULIC | | UNUSED Oil Gear drive. Mfd by Fluid Power Drive, Type DXP2011, SN 125950. Max rpm 1140, rated 1100 psi. W/powerpak. |
|
|
| 43480 | PUMP | HYDRAULIC | | Oil Gear fluid drive. Type DX-1211, SN 81241. 1140 rpm, 1100 psi. Pump only, no motor or reservoir. |
|
|
| 43646 | PUMP | HYDRAULIC | 30 | 30 HP Oil Gear hydraulic unit. Mdl DH2011. 1100 psi, 1140 rpm. Mtd on reservoir. W/30 HP, 3/60/220/440 volt, 1175 rpm TEFC motor. |
|
|
| 43969 | PUMP | HYDRAULIC | 5 | 5 HP hydraulic power unit. Mfd by Hydro Mech Supply, SN 5682. 1" x 1/2" Vikers CS pump. Direct driven by 5 HP, 3/60/230/460 volt, 1170 rpm TEFC motor. Mtd on 18" x 12" x 28" CS tank, 26 gal capacity. |
|
|
| 46879 | PUMP | HYDRAULIC | 40 | 40 HP Vickers CS hydraulic power unit. 1 1/2" x 1 1/4" gear pump driven by 40 HP, 3/60/230/460 volt, 1750 rpm TEFC motor. Mtd on 54" x 30" x 24" CS oil reservoir. |
|
|
| 49686 | PUMP | HYDRAULIC | 5 | 5 HP, CS hydraulic pump. Mfd by Miller Machine Co, SN 820042, Mdl 1PH-4A-86-11. Driven by 5 HP, 3/60/230/460 volt, 1160 rpm TEFC motor. Mtd on 2' x 1'6" x 3' CS tank. |
|
|
| 73414 | PUMP | HYDRAULIC | 20 | 20 HP Trola-Dyne hydraulic powerpak. SN XL-921-FSCMW625. W/Rexroth pump, 117 liters/min (30 gal/min) @ 14 bar (250 psi). Driven by 20 HP, 3/60/230/460 volt, 1770 rpm TEFC motor. Mtd on 75 gal oil tank, 24" wide x 20" high x 35" deep. Air cooled oil cooler. |
|
|
| 73415 | PUMP | HYDRAULIC | 15 | 15 HP Trola-Dyne hydraulic powerpak. SN XL8887, Type W626. W/Rexroth pump #A10VS-40DFR-1L3014. Driven by 15 HP, 3/60/220/440 volt, 1770 rpm TEFC motor. Mtd on 75 gal tank, 24" x 20" x 35". Water cooled oil cooler. |
|
|
| 73416 | PUMP | HYDRAULIC | 40 | 40 HP fluid power hydraulic powerpak. Mfd by Falk, SN A-FPG-408W-13, Type 40VCVFAW2221-50. 1" x 1" pump driven by 40 HP, 3/60/220/440 volt, 1770 rpm TEFC motor. Mtd on 50 gal CS tank, 43" x 19" x 14". Water cooled oil cooler. |
|
|
| 73417 | PUMP | HYDRAULIC | 15 | 15 HP Trola-Dyne hydraulic powerpak. SN XL888-2, Type W626. W/Rexroth pump #A10VS-40DFR-1L3014. Driven by 15 HP, 3/60/220/440 volt, 1770 rpm TEFC motor. Mtd on 75 gal tank, 24" x 20" x 35". Water cooled oil cooler. |
|
|
| 76586 | PUMP | HYDRAULIC | 30 | 30 HP hydraulic unit w/air cooler. Mfd by Pabco Fluid Power Co. Pump direct coupled to 30 HP, 3/60/460 volt, 1765 rpm TEFC motor. Skid mtd pump, motor, oil reservoir and fan cooled oil cooler. Oil cooler Mdl ADVH-25, SN U15809. Tube pressure 300 psi @ 400 deg F. Fan driven by 1 HP, 3/60/208/230/460 volts, 1725 rpm TEFC motor. |
|
|
| 76587 | PUMP | HYDRAULIC | 30 | Approx 30 HP hydraulic unit. Mfd by Control Power Co, SN 2022. (2) pump unit. #1: Denison pump, Mdl 1DOG, SN OD17-4430, driven by approx 25-30 HP motor. #2: pump direct coupled to 3 HP, 3/60/230/460 volt, 1160 rpm motor. Oil cooler, mfd by Young Radiator, Mdl OCH-174. Fan driven by 1/6 HP, 1/60/120 volt motor. |
|
|
| 76645 | PUMP | HYDRAULIC | 30 | 30 HP Hydreco hydraulic drive. SN 86471, Type 40230-3, Order #PFC-3015. Max disp 30 gpm @ 3500 psi. 30 HP Hydreco hydraulic drive. SN 86471, Type 40230-3, Order #PFC-3015. Max disp gpm 30 @ 3500 psi. |
|
|
| 78473 | PUMP | HYDRAULIC | 20 | 20 HP Vickers hydraulic drive. SN 005471, Mdl HAS-12-20B-L-H-C-11. Max 1200 rpm, 19.3 gpm, 1475 psi. Direct coupled to 20 HP, 3/60/220/440 volt, 1775 rpm motor, UL label. W/remote speed control. |
|
|
| 79934 | PUMP | HYDRAULIC | | 1120 rpm Oil Gear hydraulic drive. SN 97174, Type DH2011. Rated pressure 1100 psi. Mtd on 18" wide x 10" deep x 48" long CS oil tank. |
|
|
| 79935 | PUMP | HYDRAULIC | | 1140 rpm Oil Gear hydraulic drive. SN 92266, Type DH1211. Rated pressure 1100 psi. Mtd on 18" wide x 10" deep x 48" long CS oil tank. |
| 49 Items Returned | Go To Page: | 1 | 2 | 3 |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|