 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Pumps 
Pumps move liquids. All process plants have pumps. The types of pumps include centrifugal, hydraulic, rotary, reciprocating, and vacuum pumps. The capacity of a pump is defined by the amount of fluid passing through the unit rated in GPM (Gallons per Minute), and the discharge pressure rated at Head Feet. The head is the height of the column of fluid that the pump can push. Types of pumps: - Centrifugal pumps - the most widely used pumps in processing plants are Centrifugal pumps. They consist of an impellor rotating within a casing
- Reciprocating pumps – positive displacement pumps that have a higher efficiency than centrifugal pumps. The classes of reciprocating pumps include piston pumps, plunger pumps, and diaphragm pumps.
- Rotary pumps - In rotary pumps mechanical displacement of the liquid is produced by rotation of one or more members within a stationary housing. This type of pump includes gear pumps that have two impellors in a housing for thicker liquids, Moyno pumps which are progressive cavity pumps, and screw pumps.
- Hydraulic pumps – designed to generate fluid power.
- Vacuum pumps - designed to pull vacuum.
- Water seal vacuum pumps (Nash, Kinney, SiHi) use water to create suction. These produce some vacuum with higher CFM flow.
- Oil seal vacuum pumps (Kinney, Stokes, Huckepack, Reictsche) provide very high vacuum
- Dry seal vacuum pumps (Busch) provide high vacuum
|
|
IPPE Equipment Seach
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 86 Items Returned | Go To Page: | 1 | 2 | 3 | 4 | 5 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 1492 | PUMP | RECIPROCATING | 14 | 13.3 gpm (798gph), Manton Gaulin 304SS high pressure triplex pump. 50 HP motor, UL label for hazardous locations. W/gyrol fluid drive and Falk concentric speed reducer driving the pump. Pump rated for 5,000 psi. Type 750HPK112-5RAY, SN 1060-1273. |
|
|
| 17136 | PUMP | RECIPROCATING | 0 | 3 gph, SS reciprocating pump. Mfd. by Hills McCanna, Model UMIF, SN 48165. Driven by 1/3 HP, 115/230 volt, 1725 rpm motor and gearbox. |
|
|
| 17307 | PUMP | RECIPROCATING | | 124 ML/hr @ 1,000 psi, 316 SS "mini" metering pump. Mfd. by Milton Roy Comp., Model MM-1-B-29, SN 63060. 29 spm. Driven by direct coupled 1/4 HP, 1/60/115 volt, 1725 rpm motor. Mounted on base. |
|
|
| 24909 | PUMP | RECIPROCATING | 2 | 2.25 gpm @ 150 psi, dual diaphragm metering pump. Mfd by Yar-y Cyclopharm, Mdl 0725111481, SN 4393. Carpenter 20 and Hastelloy construction. Both pumps mtd on cart driven by (1) 7.5 HP motor. |
|
|
| 25369 | PUMP | RECIPROCATING | | UNUSED 5.1 gph Milton Roy metering pump (controlled volume pump). Mdl R121A-117, SN 95002-2. Pressure 900 psi. General Electric AC motor, 1/4 HP, 1725 rpm, single phase, 115 volts. |
|
|
| 31658 | PUMP | RECIPROCATING | 52 | 52 gpm @ 65 psig, Wilden aluminum diaphragm pump. Mdl M8, SN 48160. 50 cfm air consumption. 2" inlet and outlet. |
|
|
| 38056 | PUMP | RECIPROCATING | 65 | 65 gpm Aldrich CS vert triplex pump. Mdl V-3, Size 2-3/8x7. 198 rpm. Requires 250 HP motor. 65 gpm Aldrich CS vert triplex pump. Mdl V-3, Size 2-3/8x7. 198 rpm. Requires 250 HP motor. |
|
|
| 43489 | PUMP | RECIPROCATING | 1 | UNUSED 9.6 gph @ 1175 psi, Milroyal 316SS metering pump. Mfd by Milton Roy Co, Mdl AMR1-42-95T, SN 154964. 1/2" x 1/2" inlet/outlet. 5/8" dia 316SS plunger, 1 1/2" stroke. 95 strokes per minute. W/pneumatic hydraulic stroke adjustment. |
|
|
| 44479 | PUMP | RECIPROCATING | | 2200 psi Triplex 316SS reciprocating pump body only. Mdl 9092US. 1.25 x 1. |
|
|
| 45982 | PUMP | RECIPROCATING | | American Lewa Inc, 316SS high pressure metering pump. SN 100948. 178 strokes/min. Driven by 10 HP, 3/60/460 volt motor and varidrive. |
|
|
| 46267 | PUMP | RECIPROCATING | | 0.11 gpm @ 445 psi, Lapp Pulsafeeder 316SS diaphragm metering pump. SN 4594. Driven by 1/2 HP, 1/60/115/230 volt, 1725 rpm TEFC motor. Base mtd. |
|
|
| 46268 | PUMP | RECIPROCATING | 2 | 2.5 gpm @ 225 psi, Lapp Pulsafeeder teflon metering pump. SN R1318. 2" piston, 87 strokes per min. Driven by 3 HP, 3/60/460 volt, 1735 rpm motor. Base mtd. |
|
|
| 46272 | PUMP | RECIPROCATING | 2 | 2.5 gpm @ 225 psi, Lapp Pulsafeeder teflon metering pump. SN X8669, Mdl CPS-4AP. 2" piston, 58 strokes per min. Direct driven by 2 HP, 3/60/220/440 volt motor. Base mtd. |
|
|
| 49528 | PUMP | RECIPROCATING | 122 | 122 gpm @ 80'TDH, Marlow CS sludge pump. SN 531446, Type PE111W. Single plunger 11" dia. Belt driven by 5 HP, 3/60/230/460 volt, 1150 rpm open motor. Max suction lift 22'. Shaft rpm 48. 11 stroke length adjustments. Mtd on base. |
|
|
| 49529 | PUMP | RECIPROCATING | 122 | 122 gpm @ 80'TDH, Marlow CS sludge pump. SN 532445, Type PE111W. Single plunger 11" dia. Belt driven by 5 HP, 3/60/230/460 volt, 1150 rpm open motor. Max suction lift 20'. Shaft rpm 48. 11 stroke length sdjustments. Mtd on base. |
|
|
| 49530 | PUMP | RECIPROCATING | 122 | 122 gpm @ 80'TDH, Marlow CS sludge pump. SN 699024, Type PE111W. Single plunger 11" dia. Belt driven by 5 HP, 3/60/230/460 volt, 1150 rpm open motor. Max suction lift 20'. Pump shaft rpm 48. 11 stroke length adjustments. Mtd on base. |
|
|
| 70065 | PUMP | RECIPROCATING | | 3" x 3" Sandpiper pneumatically operated double diaphragm pump. Mfd by Gordon Rupp Co, Mdl SA3-A, Type DA-2, SN 5671. Max recommended air pressure 100 psi. Aluminum construction. |
|
|
| 71816 | PUMP | RECIPROCATING | | 27.6 gph Pulsafeeder 316SS diaphragm metering pump. SN 8612688-1, Mdl 680H-S-AE. Rated 130 psi. Gear ratio 11:1. 1.37" piston dia. Driven by 1/2 HP, 3/60/230/460 volt, 1725 rpm TEFC motor. |
|
|
| 71817 | PUMP | RECIPROCATING | | 27.6 gph Pulsafeeder 316SS diaphragm metering pump. SN 8803217-1, Mdl 680H-S-AE. Rated 130 psi. Gear ratio 11:1. 1.37" piston dia. Driven by 1/2 HP, 3/60/230/460 volt, 1725 rpm TEFC motor. |
|
|
| 71819 | PUMP | RECIPROCATING | 1 | 59.8 gph Pulsafeeder 316SS metering pump. SN 8509-419-2, Mdl 880H-S-APE. 15:1 ratio, 100 psi, piston dia 2.125". Driven by 1/2 HP, 3/60/230/460 volt, 1140 rpm motor. |
| 86 Items Returned | Go To Page: | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|