 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Pumps 
Pumps move liquids. All process plants have pumps. The types of pumps include centrifugal, hydraulic, rotary, reciprocating, and vacuum pumps. The capacity of a pump is defined by the amount of fluid passing through the unit rated in GPM (Gallons per Minute), and the discharge pressure rated at Head Feet. The head is the height of the column of fluid that the pump can push. Types of pumps: - Centrifugal pumps - the most widely used pumps in processing plants are Centrifugal pumps. They consist of an impellor rotating within a casing
- Reciprocating pumps – positive displacement pumps that have a higher efficiency than centrifugal pumps. The classes of reciprocating pumps include piston pumps, plunger pumps, and diaphragm pumps.
- Rotary pumps - In rotary pumps mechanical displacement of the liquid is produced by rotation of one or more members within a stationary housing. This type of pump includes gear pumps that have two impellors in a housing for thicker liquids, Moyno pumps which are progressive cavity pumps, and screw pumps.
- Hydraulic pumps – designed to generate fluid power.
- Vacuum pumps - designed to pull vacuum.
- Water seal vacuum pumps (Nash, Kinney, SiHi) use water to create suction. These produce some vacuum with higher CFM flow.
- Oil seal vacuum pumps (Kinney, Stokes, Huckepack, Reictsche) provide very high vacuum
- Dry seal vacuum pumps (Busch) provide high vacuum
|
|
IPPE Equipment Seach
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 2272 | PUMP | VACUUM | 600 | Nash Mdl L6 rotary water seal vac pump. Designed for 600 cfm @ 20" Hg. Take 50 HP motor. Appear to have been rebuilt, w/replacement bodies which do not have test numbers. Bare pump. |
|
|
| 3040 | PUMP | VACUUM | 3000 | H-11 Nash "Hytor" rotary water seal vac pump. Size HST11T. Designed for approx 3,000 cfm @ 20" Hg, 1,800 cfm @ 24" Hg. (Typical test numbers are 62-1029 and AD-5457.) "Bare pump". |
|
|
| 4580 | PUMP | VACUUM | 760 | Nash Mdl H8 rotary water seal vac pump. Test #79U7279. Designed for 760 cfm @ 25" Hg. Takes 60 HP max. Bare pump. |
|
|
| 6997 | PUMP | VACUUM | 400 | 400 cfm @ 15" Hg, Nash, CS vacuum pump, Model K-5. SN #Y-3716. 710 rpm. Takes 20 HP motor. |
|
|
| 8576 | PUMP | VACUUM | 500 | 500 cfm @ 20" Hg, Nash vacuum pump, CS, size L6. V belt drive, 680 rpm. Bare pump. -1, Test No. 59-3950. -2, Test No. 59-2588. |
|
|
| 10054 | PUMP | VACUUM | 675 | 675 cfm @ 25" Hg, CS Nash H-8 water seal vac pump. 576 rpm. Test #584179. Belt driven by 60 HP, General Electric 3/60/220/440 volt, 1770 rpm drip-proof motor, SN RR143028. Skid mtd. |
|
|
| 10401 | PUMP | VACUUM | 500 | 500 cfm @ 19" Hg, CS Nash L6 vac pump only. 680 rpm. Test #: AD3316, AD7217, 577755, AD11007, AD2096, AD6163, AD6162, AD5141, AD7218. |
|
|
| 13620 | PUMP | VACUUM | 350 | 350 cfm, Kinney CS vac pump. Mdl KD-350, SN 1400G5071. Mech seal. No motor. |
|
|
| 18182 | PUMP | VACUUM | 13 | 13 cfm @ 23.5" Hg, Sihi bronze vacuum pump. Mdl CL02704KK1Q, SN 2264-714. Packing gland on shaft. No motor or base. Requires 2 HP, 1750 rpm motor. |
|
|
| 18628 | PUMP | VACUUM | | Consolidated vacuum diffusion pump, CS. Type PML20C, SN 4026. 460 volt, 11 KW, 3 phase. With dry cap baffle. High vacuum pump. |
|
|
| 19314 | PUMP | VACUUM | 130 | 130 cfm @ 27" Hg, Sihi CS vac pump. Mdl CL4616KKM, SN 2263754. Driven by 10 HP motor. |
|
|
| 22733 | PUMP | VACUUM | 15 | 15 cfm @ 25" Hg, Nash Mdl AL671 bronze vacuum pump. 1745 rpm. Packing glands on shaft. Driven by approx 2 HP motor. Mounted on base. |
|
|
| 22734 | PUMP | VACUUM | 15 | 15 cfm @ 25" Hg, Nash Mdl AL671 bronze vacuum pump. Test #X-2393. 1745 rpm. Packing glands. Driven by 2 HP, 3/60/220/440 volt, 1745 rpm motor, UL label. Mounted on base. |
|
|
| 23584 | PUMP | VACUUM | 70 | 70 cfm @ 20" Hg, CS Sihi vacuum pump. Mdl LPHB3708, SN 2690-695. 1.5" x 1.5". Coupled to 7.5 HP, 1740 rpm, Class I, Group D, 3/60/230/460 volt motor. Packing gland. Unitized base. |
|
|
| 23597 | PUMP | VACUUM | 74 | 74 cfm @ 25" Hg, CS Sihi vacuum pump. Mdl CL3708KKB, SN 779-762. Packing gland on shaft. Direct driven by 7.5 HP, 3/60/230/460 volt, 1745 rpm motor, UL label. Mounted on base. |
|
|
| 23720 | PUMP | VACUUM | 74 | 74 cfm @ 25" Hg, Sihi CS vacuum pump. Mdl LPHA3708, SN 2330310. Unit direct driven by 7.5 HP, 3/60/230/460 volt, 1755 rpm motor, UL label. |
|
|
| 23982 | PUMP | VACUUM | 960 | 960 cfm @ 20" Hg, Sihi CS vacuum pump. Mdl LPH-70540, SN 2357289. Driven by 60 HP, 3/60/460 volt, 1775 rpm drip-proof motor. Mounted on skid w/2' dia x 5' str side CS receiver. |
|
|
| 24576 | PUMP | VACUUM | 2000 | 2,000 cfm @ 24" Hg, Nash Mdl H-10 vac pump. Test #67-168. Unit is driven by 125 HP, 3/60/460 volt, 1180 rpm w/belt drive giving 280 rpm on pump. |
|
|
| 25352 | PUMP | VACUUM | 150 | 150 cfm @ 475 rpm, Stokes Micro-vak pump. Mdl 212H-10, SN C88353. Driven by 5 HP, 3/60/220/440 volt, 1740 rpm TEFC mtr. |
|
|
| 30793 | PUMP | VACUUM | 150 | 150 cfm Stokes high vac oil seal microvac pump. Mdl 212-H-11, SN CC86085. Belt driven by 7.5 HP, 3/60/230/460 volt motor. |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|