+1 609 586 8004
Today is: September 26, 2018
Sell to IPP
Sell to IPP
Air Separation Plants
Ammonium Nitrate Plants
Ammomium Sulfate Plants
Bisphenol A Plants
Dimethyl Formamide (DMF) Plants
Dimethylamine (DMA) Plants
Dimethylacetamide (DMAC) Plants
Dye and Pigment Plants
Edible Oil Plants
Fatty Acids Plants
Fiberglass Insulation Plants
Fine Chemical Plants
Gasification and Syngas Systems
Hydrogen Chloride Recovery Systems
Hydrogen Peroxide Plants
Isopropyl Alcohol (IPA) Plants
Methyl Amines Plants
Methyl tert-butyl ether (MTBE) Plants
Liquefied Natural Gas (LNG) Plants
Nitric Acid (HNO3) Plants
Polyester PET Plants
Polyethylene (LDPE) Plants
Polyvinyl Chloride (PVC) Plants
Propylene Oxide (PO) Plants
Refinery (Complete) Plants
Sulfuric Acid Plants
Supercritical Extraction Plant
Synthetic Chemicals Plants
Synthetic Gas Plants
Vinyl Chloride Monomer (VCM) - EDC Plants
+1 (609) 586-8004
IPPE Plant Stock Number:
Return to search list
Add Plant to Quote
is an alcohol containing multiple hydroxyl groups.
two different technological disciplines the term "
" has a special meaning: food science and polymer chemistry.
Sugar alcohols, a class of
, are commonly added to foods because of their lower caloric content than sugars; however, they are also, in general, less sweet, and are often combined with high-intensity sweeteners. They are also added to chewing gum because they are not broken down by bacteria in the mouth or metabolized to acids, and thus do not contribute to tooth decay.
, erythritol, and
are some of the more common types. Sugar alcohols may be formed under
reducing conditions from their analogue sugars.
In polymer chemistry,
are compounds with multiple hydroxyl functional groups available for organic reactions. A molecule with two hydroxyl groups is a
, one with three is a
, one with four is a
and so on.
such as glycerin,
, ethylene glycol and sucrose often serve as the starting point for polymeric
. These materials are often referred to as the "initiators" and reacted with propylene oxide or ethylene oxide to produce polymeric
. However, they should not be confused with free radical "initiators" used to promote other polymerization reactions. The functional group used as the starting point for a polymeric
need not be a hydroxyl group; there are a number of important
which are built up from amines. A primary amino group (-NH2) often functions as the starting point for two polymeric chains, especially in the case of polyether polyols.
are generally used to produce other polymers. They are reacted with isocyanates to make polyurethanes used to make mattresses, foam insulation for appliances (refrigerators and freezers), home and automotive seats, elastomeric shoe soles, fibers (e.g. Spandex), and adhesives.
Polymeric polyols are usually polyethers or polyesters. Polyether polyols are made by reacting epoxides like ethylene oxide or propylene oxide with the multifunctional initiator in the presence of a catalyst, often a strong base such as potassium hydroxide or a double metal cyanide catalyst such as zinc hexacyanocobaltate-t-butanol complex.Common polyether diols are polyethylene glycol, polypropylene glycol, and poly(tetramethylene ether) glycol. The examples shown below are fairly low molecular weight triols based on glycerin (a triol) being reacted with propylene oxide, ethylene oxide or a combination of the two. In reality, the chains would not be of equal length in any one molecule and there would be a distribution of molecular weight polyols within the material. Polyether polyols account for about 90% of the polymeric
used industrially; the balance is polyester polyols
GET IN TOUCH
Call us at +1 609 586 8004 or
Sell to IPP
Copyright 2006 - 2018 by International Process Plants