Emulsion Poly Vinyl Chloride Production Plant, producing various PVC paste grade resins utilizing the emulsion technology.
Production capacity is 21,500 MT/year with an average plant utilization of 91.3% for all grades based on 8,000 hrs/year
Plant Production ceased in January 2016 as the plant is not considered part of the strategic focus.
Equipment was maintained using high end maintenance standards, namely the manufacturer’s guidance and Seller’s standards, whereby Preventive Maintenance Program and Reliability Methodologies were used.
The Plant is fully automated and equipped with safety and environmental measures to adhere to international standards such as International Organization for Standardization (“ISO”).
Plant's control and computer systems were replaced.
Major Equipment List: Contact IPP for a Complete List
- Dryer Air Blower - Dryer Exhaust Blower - Dryer Secondary Filter Blower - Polymerization Reactors (Autoclaves) with Overhead Condensers - Vinyl Chloride Storage Tank - Run Down Vessels - Latex Storage Tanks - Latex Stripper Vessel - Seed Tank - Demin Water Tank - Chemical Tanks & Vessels - Waste Water Treatment system - Gas Holder for VCM Storage – Floating Bell Type - Chilled Water Tank
E-PVC 673 Application:PVC 673E has been developed for making plastisols of low yield points and low viscosity, agents. PVC 673E plastisols are ideal for chemical foams of very good quality with very regular closed cell structure, over a large range of oven temperatures. The main applications are: Cushioned vinyl flooring and Artificial leather.
E-PVC 701E Application:Pastes made from PVC 701E are ideal for compact, clear thin coating, and also for chemically blown spread coatings with low plasticizer content. Applications include coatings for conveyor belts, tarpaulins, raincoats, swimming pool liners, tablecloths, wall covering, top coats, handbags, luggage, vinyl backed carpets, and cushioned vinyl floor coverings.
E-PVC 741 Application:Pastes made from PVC 741E are ideal for compact, clear thin coating, and also for chemically blown spread coatings with low plasticizer content. Applications include coatings for conveyor belts, tarpaulins, raincoats, swimming pool liners, tablecloths, wall
E-PVC 703E Application:Typical Applications: PVC 703E has been developed for making plastisols of high yield points and high viscosity, without adding thickening agents. PVC 703E plastisols are ideal for chemical foams of very good quality with very regular closed cell structure, over a large range of oven temperatures. Applications include plastisols for car body coating and under sealants, foam - wall covering, and compact or foamed artificial leather of very high softness.
GET IN TOUCH
Call us at (609) 586-8004 or CONTACT US