The following is a list of the systems included in the process unit:
Light Ends Recovery
28 in Hg
Naphtha Hydrofining and Reforming
Light Ends Recovery
Vacuum Distillation - Asphalt Plant No. 1
Vacuum Distillation - Asphalt Plant No. 2
Fuel and Gas system to Refinery
Fuel oil and Fuel gas are distributed to the process furnaces, motors of recirculation gas compressors, 225 HP packaged steam generator and the diesel driven power generators.The fuel gas produced in the process unit is the main fuel to furnaces and is supplemented by fuel oil.Compressed AirWe have four electrical compressor that supply 1300 scfm of air at 100 psig to instrument and process unit utilities (Control valves, pneumatic instruments, regenerations), Workshop, and the laboratory.
Nitrogen I Hydrogen supplyThe refinery gets Nitrogen and Hydrogen to satisfy its needs from a cluster of skid mounted cylinder storage units with total capacity 100,000 cubic feet at 2,050 psig of Hydrogen, 40,000 cubic feet at 1,850psi of Nitrogen. Nitrogen and Hydrogen is purchased from local suppliers. Nitrogen is used for utilities and for purging of equipment, while purchased Hydrogen is only for use during the reformer catalyst regeneration process.
Electric power supplyElectrical Power is supplied by the following equipment:
In addition there is an electrical substation of 1.5KVA connected to Nation Power Grid
Electrical systemThe refinery works with the nominal voltage of 480 volts. Main switch gears and bus bars are located in the power house close to the power generator.
integrated process unit of the Hydroskimming type. It is capable of processing crude oilswith qualities within the following parameters:
Parameter Value API gravity > 21TAN 1mg/gr max Total Sulfur 1.35% maxTRS 0.6% maxSalts Content 12 ptb max Crude oils with parameters outside of the above values can be processed when blended with other feedstock, resulting in acceptable parameters.
GET IN TOUCH
Call us at +1 609 586 8004 or CONTACT US