600 to 850 tons Snyd CHILLER #225212 For Sale

Quote Contents:

Top Equipment Categories

Contact IPP 

  Call USA: +1 (609) 586-8004
UK: +44-1642-367910

LET US FIND THE RIGHT EQUIPMENT FOR YOU!  Click here to learn more

600 tons chiller
( 1814400 kcal/h chiller )

IPPE Stock Number: 225212

Equipment Category CHILLER
Capacity 600 TONS / 1814400 KCAL/h
Product Description 600 to 850 tons Snyder General (McQuay) PEH-100 water cooled packaged centrifugal chiller, style 9993715020, serial #5ZA81047-00, factory charged 330, feild charged 1320, refrigerant 134a, 1650lbs, approx 6 degrees C leaving chilled water and 35 degrees C leaving condenser water, (1) Synder General model CE109KAZ45K2X centrifugal compressor, style 099371502F, serial #5ZA0080101, 3 phase, 50 Hz, 415 volt, 1141 LRA, 3422 Wye, 585 RLA, (1) Snyder General Evaporator, model E3016492RC, style 099371502E, serial #5ZA0014500, national board #21741, working pressure 180 psi @ 122 degrees F, (1) Synder General condenser, model C30164YY2RD, style 0993715020, serial #5ZA0017600, national board #21772, working pressure 225 psi @ 250 degrees F,

Used Chillers, Used Refrigeration Compressors & Used Cooling Towers

Used ChillersInternational Process Plants has many used chillers for sale and other used processing equipment for use in industrial refrigeration.

Much like a Boiler is used to heat a process, a Chiller and other Refrigeration equipment is typically used to cool a process.

Chillers work by compressing a refrigeration gas (R132A, Freon, R22) into a liquid, and using a special refrigeration valve, releasing the compressed liquid back into a gas.

The conversion of the liquid back into a gas removes heat and creates cold. It is the same principal as when you use a can of compressed air to clean your computer keyboard. The longer you release the compressed air, the colder the can gets.

You use the cold that is created by using a heat exchanger for liquid cooling or air exchanger if you are cooling air.

Chillers are grouped by the type of compressor:

  • Centrifugal
  • Screw Type
  • Reciprocating

Chillers are further grouped by the type of cooling used to dispense the heat generated:

  • air cooled (radiators)
  • water cooled (condensers)

Chillers are typically a packaged design with the compressor, condenser, evaporator, pumps, valves and controls all skid mounted.

Chillers are often distinguished by the Tons of Refrigeration they produce and at what temperature. A rule of thumb to use when looking for the capacity of a chiller is 1 ton of refrigeration @ 40 degrees F for each horsepower the compressor uses. The lower the discharge temperature, the more horsepower is required.

Cooling towers are designed to take water that is heated during the refrigeration process and cool it quickly by passing it through a cooling tower where large fans cool the water.

Used, Unused, and re-conditioned Chillers instock. maufacturers include: Advantage, AEC, BAC, Berg, Bry-Air, Budzar, Carrier, Cincinnati, Conair, Cooling Technologies, DUNHAM BUSCH, Dunham/Bush, Fasti, FES, Frick, FTS SYSTEMS, GES, Jensen, Kinectic Dispersion, McQuay Snyder, McSaw, Neslab, R, Sterlco, Teco, Thermalcare/Mayer, Trane, Trane Co, Transtore, York .


Call us at (609) 586-8004 or CONTACT US