1521 ton of refriger CHILLER #229459 For Sale

Quote Contents:

Top Equipment Categories

Contact IPP 

  Call USA: +1 (609) 586-8004
UK: +44-1642-367910


LET US FIND THE RIGHT EQUIPMENT FOR YOU!  Click here to learn more

1521 ton techno frigo compressor chiller
( 4600000 kcal techno frigo compressor chiller )

IPPE Stock Number: 229459

Equipment Category CHILLER
Sub Group COMPRESSOR
Capacity 1521 TON / 4600000 Kcal
Product Description 1521 ton of refrigerant rotary screw Ammonia chiller compressor system, manufactured by Techno Frigo, suction pressure 4.2 bar g @ 5 degrees C, delivery pressure 19.7 bar g @ 95 degrees C, 600 m3/hr @ 7.7 degrees C cooling water, absorbed power 1583 kw, 3550 rpm, 1750kw, 60 Hz, 4160 volt IP 55 motor, (1) carbon steel condenser, 744,000kg/hr cooling water, 40 degrees C in, 48 degrees out, pressure ammonia side 25 barg, demin water side 7 bar, (1) carbon steel shell and tube evaporator, 600 m3/hr cooling water, 22 degrees C in, 30 degrees C out, oil system and reservoir


Used Chillers, Used Refrigeration Compressors & Used Cooling Towers

Used ChillersInternational Process Plants has many used chillers for sale and other used processing equipment for use in industrial refrigeration.

Much like a Boiler is used to heat a process, a Chiller and other Refrigeration equipment is typically used to cool a process.

Chillers work by compressing a refrigeration gas (R132A, Freon, R22) into a liquid, and using a special refrigeration valve, releasing the compressed liquid back into a gas.

The conversion of the liquid back into a gas removes heat and creates cold. It is the same principal as when you use a can of compressed air to clean your computer keyboard. The longer you release the compressed air, the colder the can gets.

You use the cold that is created by using a heat exchanger for liquid cooling or air exchanger if you are cooling air.

Chillers are grouped by the type of compressor:

  • Centrifugal
  • Screw Type
  • Reciprocating

Chillers are further grouped by the type of cooling used to dispense the heat generated:

  • air cooled (radiators)
  • water cooled (condensers)

Chillers are typically a packaged design with the compressor, condenser, evaporator, pumps, valves and controls all skid mounted.

Chillers are often distinguished by the Tons of Refrigeration they produce and at what temperature. A rule of thumb to use when looking for the capacity of a chiller is 1 ton of refrigeration @ 40 degrees F for each horsepower the compressor uses. The lower the discharge temperature, the more horsepower is required.

Cooling towers are designed to take water that is heated during the refrigeration process and cool it quickly by passing it through a cooling tower where large fans cool the water.

Used, Unused, and re-conditioned Chillers instock. maufacturers include: Advantage, AEC, BAC, Berg, Bry-Air, Budzar, Carrier, Cincinnati, Conair, Cooling Technologies, DUNHAM BUSCH, Dunham/Bush, Fasti, FES, Frick, FTS SYSTEMS, GES, Jensen, Kinectic Dispersion, McQuay Snyder, McSaw, Neslab, R, Sterlco, Teco, Thermalcare/Mayer, Trane, Trane Co, Transtore, York .

GET IN TOUCH

Call us at (609) 586-8004 or CONTACT US