41,000 M3/hr. (24,13 COMPRESSOR #238350 For Sale

Quote Contents:

Top Equipment Categories

Contact IPP 

  Call USA: +1 (609) 586-8004
UK: +44-1642-367910

LET US FIND THE RIGHT EQUIPMENT FOR YOU!  Click here to learn more

24131 cfm borsig centrifugal compressor
( 41000 m3h borsig centrifugal compressor )

IPPE Stock Number: 238350

Equipment Category COMPRESSOR
Capacity 24131 CFM / 41000 M3H
Product Description 41,000 M3/hr. (24,131 CFM), CS, five stage, centrifugal nitrogen compressor. Manufactured by Borsig. Type RG 040/ 2+3. Serial # 26-1091. Dual suction lines increase N2 from 12 bar (174 psi) to 38 bar (551 bar). Machine rated maximum 55 bar(797 psi). Maximum operating temperature is 109 degrees C. Input power is 10800 kW (14,483 Hp.). Driven by an ABB 10800kW ac motor, 10,000 volts 50 hz. Drive is through a Renk speed increasing gearbox with output shafts rated for 14,000 & 17,000 RPM.

Used Compressors

Used CompressorsCompressors are designed to compress (over 20 psi) and move air and other gases such as hydrogen, oxygen, nitrogen, etc. IPP's Compressors for sale are listed by the Cubic Feet per Minute or CFM rating and pressure.

The main types of compressors include:

  • centrifugal compressors
  • rotary compressors
  • reciprocating compressors

Used Centrifugal Air / Gas Compressors for Sale

Centrifugal compressors use centrifugal forces to pump air or gas to develop pressure. They typically operate at speeds of 3500 rpm or higher. Multiple stages are used to produce the required pressure rise. This type of compressor is driven by an electric motor, steam turbine, or gas turbine, with or without speed increasing gears.

Rotary compressors, blowers, and vacuum pumps are positive displacement type machines. This type of machine incorporates rotating internal lobes, screws or vanes that compress the gas or air. They are constant volume machines with variable discharge pressure. The volume can be varied only by changing the speed or bypassing or wasting some of the capacity of the machine. The types of rotary compressors are classified by the type of rotor they use. These include: straight-lobe, sliding vane, liquid piston, screw type.

Reciprocating compressors are furnished in either single-stage or multi-stage types. The principle parts of this type of machine are the cylinders and the pistons. The different types you will see include single acting air cooled or water cooled, single stage double acting water cooled, horizontal or vertical.


Call us at (609) 586-8004 or CONTACT US