800 cfm donaldson torit baghouse dust collector ( 1359 m3h donaldson torit baghouse dust collector )
48 diameter inches donaldson torrit baghouse dust collector ; carbon steel ( 1219 diameter mm donaldson torrit baghouse dust collector ; carbon steel)
75 square feet hala baghouse dust collector ; stainless steel ( 7 square meter hala baghouse dust collector ; stainless steel)
760 sqft donaldson torit division baghouse dust collector ( 70 m2 donaldson torit division baghouse dust collector )
diameter in feet mikro pulsaire baghouse dust collector ; stainless steel ( diameter in meter mikro pulsaire baghouse dust collector ; stainless steel)
439 square feet research-cotterell, baghouse dust collector ( 40 square meter research-cotterell, baghouse dust collector )
439 square feet research-cottrell, baghouse dust collector ( 40 square meter research-cottrell, baghouse dust collector )
141 square foot baghouse dust collector ; carbon steel ( 13 square meter baghouse dust collector ; carbon steel)
75 square foot flow tronics baghouse dust collector ; stainless steel ( 7 square meter flow tronics baghouse dust collector ; stainless steel)
Dust Collectors control the dust in a variety of processes. Dust collectors can also be called bag houses.
Dust Collectors can be use to remove dust particles from a process or collect dust that is the finished product.
Dust collectors are large chambers that are either square or round with internal filters that are typically made of woven fabric bags stretched over a cage as a filter medium.
Some of the newer dust collectors use cartridge filters instead of filter bags. In operation, the dust laden gas is collected in the chamber and passes through the filter bags into a manifold where the cleaned gas exits the chamber. The dust is collected on the outside of the filter bag and remains inside the chamber.
There are several methods to clean the dust off of the outside of the filter bags or cartridges.
A shaker type cleaner shakes the bags periodically to remove the dust.
The reverse air cleaner periodically blows air back though the inside of the filter bag blowing the dust off the outside of the filters.
The pulse jet cleaner uses high pressure compressed air that periodically blast through the inside of the filters to blow the dust off the outside of the bags.
The dust that is shaken, blown, or pulsed off the bags falls to the chamber bottom where it is removed through a rotary valve.
All Dust Collectors are measured by the square foot of the bag area, the CFM air flow through the collector, the material of construction, and type of dust discharge.
Another type of dust collector is a cyclone which uses air blown tangentially into a cylindrical chamber and inertia to separate the heavy dust particles out of the air stream.
GET IN TOUCH
Call us at (609) 586-8004 or CONTACT US
