1000 KW Stewart & St GENERATOR #216359 For Sale

Quote Contents:

Top Equipment Categories

Contact IPP 

  Call USA: +1 (609) 586-8004
UK: +44-1642-367910


LET US FIND THE RIGHT EQUIPMENT FOR YOU!  Click here to learn more

1000 kw diesel generator
( 1000 kw diesel generator )

IPPE Stock Number: 216359

Equipment Category GENERATOR
Sub Group DIESEL
Capacity 1000 KW / 1000 KW
Product Description 1000 KW Stewart & Stevenson Diesel Generator set, Model 12V149GDT1B1045SB, rated 1000 KW, 3 phase, 60 cycle, 277/480 volt, 1505 amps. With an IEC (International Electric Corp) generator, Model 6432LEJ-002, Serial Number A612123, frame 320, power factor 0.8 @ ambient 40 degrees C, 277/480 Volt, 965 continuous KW, 1206 KVA, 1451 AMPS. Driven by a Detroit Diesel Allison 149 Power, V12 engine with exhaust gas turbo charger, electric oil heater and muffler. Skid mounted with cooling fan serial number 126796. New hour meter on generator with 102 hours, plus 665 previous hours on the unit.


Surplus/Used Power Generators – Electric, Diesel, Gas, Steam

Used power GeneratorsIndustrial power generators turn energy from burning fuels or captured waste heat into electric power. Industrial generators fall into 4 major categories classified by the fuel that drives the generator.

There are Diesel Generators, Electric Generators, Steam Turbine Generators, and Gas Generators.

Generator Sets include the “prime mover” or engine, the generator, reduction gear, and exciter. For many of the generator sets that are powered by an internal combustion engine (gas turbine, diesel, etc), the set usually includes all of the components needed to produce electricity on one skid.

Power plants are complete plants for the production of electricity. Power plants usually contain steam boilers, generator sets, transformers, and auxiliary equipment.

Here are common terms used in describing steam turbine generators:

  • Prime Mover – the engine or turbine that moves the generator
  • Condensing – a steam turbine that exhausts directly into a condenser at below atmospheric pressure
  • Back Pressure – a steam turbine that exhausts into a process steam header at positive pressure – also called non-condensing or counter pressure.
  • Extraction – steam bled off of a steam turbine before the exhaust. This steam is used for process application or for steam cycle efficiency. Can be “controlled” or “uncontrolled”. Also called bleed.
  • Controlled – In extraction, this indicates that the turbine includes valves and regulators to control the pressure of the extraction flow over the rated flow range.
  • Load Gear – this is the reduction gear between the prime mover and generator

GET IN TOUCH

Call us at (609) 586-8004 or CONTACT US