3360.8 Kw (4201 kVA) GENERATOR #706827 For Sale

Quote Contents:

Top Equipment Categories

Contact IPP 

  Call USA: +1 (609) 586-8004
UK: +44-1642-367910

LET US FIND THE RIGHT EQUIPMENT FOR YOU!  Click here to learn more

3360 kw waukesha/ leroy somer gas generator
( 3360 kw waukesha/ leroy somer gas generator )

IPPE Stock Number: 706827

Equipment Category GENERATOR
Sub Group GAS
Capacity 3360 kW / 3360 kW
Product Description 3360.8 Kw (4201 kVA),11000 volt, 220.5 Amp, 3 phase, 50 Hz, gas engine driven electrical generator, engine manufactured by Waukesha (Dresser), model #16VAT27GL, serial #C-80859/1, SAA #2000-168, natural gas fired, continuous, comp ratio 9/1, min.WKI 91, ignition timing (BTDC) 11-02, service 4650 HP (3469 Kw), altitude limit 500 feet (152 meter), governed speed 1000 rpm, 0.80mm valve intake & exhaust clearance, firing order 1R-1L-4R-4L-7R-7L-6R-6L-8R-8L-5R-5L-2R-2L-3R-3L, AC generator (alternator) manufactured by Leroy Somer, type LSA-56-BM65-6P, serial #167056-2, IP 23, 3360.8 Kw, 4201 kVA power rating, 11000 volt, 220.5 Amp, 3 phase, 50 Hz, 1000 rpm, excitation AREP, all mounted on a carbon steel skid.

Surplus/Used Power Generators – Electric, Diesel, Gas, Steam

Used power GeneratorsIndustrial power generators turn energy from burning fuels or captured waste heat into electric power. Industrial generators fall into 4 major categories classified by the fuel that drives the generator.

There are Diesel Generators, Electric Generators, Steam Turbine Generators, and Gas Generators.

Generator Sets include the “prime mover” or engine, the generator, reduction gear, and exciter. For many of the generator sets that are powered by an internal combustion engine (gas turbine, diesel, etc), the set usually includes all of the components needed to produce electricity on one skid.

Power plants are complete plants for the production of electricity. Power plants usually contain steam boilers, generator sets, transformers, and auxiliary equipment.

Here are common terms used in describing steam turbine generators:

  • Prime Mover – the engine or turbine that moves the generator
  • Condensing – a steam turbine that exhausts directly into a condenser at below atmospheric pressure
  • Back Pressure – a steam turbine that exhausts into a process steam header at positive pressure – also called non-condensing or counter pressure.
  • Extraction – steam bled off of a steam turbine before the exhaust. This steam is used for process application or for steam cycle efficiency. Can be “controlled” or “uncontrolled”. Also called bleed.
  • Controlled – In extraction, this indicates that the turbine includes valves and regulators to control the pressure of the extraction flow over the rated flow range.
  • Load Gear – this is the reduction gear between the prime mover and generator


Call us at (609) 586-8004 or CONTACT US