Used Heat Exchangers Inventory - Search Air Fin Heat Exchangers | IPP

Quote Contents:

Top Equipment Categories

Contact IPP 

  Call USA: +1 (609) 586-8004
UK: +44-1642-367910

LET US FIND THE RIGHT EQUIPMENT FOR YOU!  Click here to learn more

  #1 Select equipment group.

  #2 Filter your results: 


Execute Search

  Standard:  
  Capacity from: to:    Filter Results
  For Capacity use numbers only. The unit of measure will be derived from the item data.
  Results Sort:
  #3 Results of search:

 

IPPE / UGE Inventory Photo

22862 square feet balke durr air fin heat exchanger
( 2124 square meter balke durr air fin heat exchanger )

Stock Number: 222358    Capacity: 22862 square feet / 2124 square meter
Description: 2124 square meter (22862 square feet) 316Ti stainless steel (1.4571) fin fan overhead cooler, manufactured by Balke Durr, fabrik #5202/2, design pressure 3.2 bar @ 135 degrees C, working pressure 1 bar @ 60 degrees C, approximately...

 

IPPE / UGE Inventory Photo

22862 sq ft balke durr air fin heat exchanger
( 2124 square meter balke durr air fin heat exchanger )

Stock Number: 222357    Capacity: 22862 sq ft / 2124 square meter
Description: 2124 square meter (22862 square feet) 316Ti stainless steel (1.4571) fin fan overhead cooler, manufactured by Balke Durr, fabrik #5202/1, design pressure 3.2 bar @ 135 degrees C, working pressure 1 bar @ 60 degrees C, approximately...

 

IPPE / UGE Inventory Photo

0 square feet hans guentner gmbh air fin heat exchanger
( 0 square meter hans guentner gmbh air fin heat exchanger )

Stock Number: 217879    Capacity: 0 square feet / 0 square meter
Description: 123 liter stainless steel air finfan cooler with 8 fans, manufactured by Hans Guentner GmbH/Germany, type GVH 066A/2x4E, serial # 6485740, rated by 21 bar/28 bar @ -60/100 degrees C, type/number of fan FA065-ADK.41.6/IZA...

 

IPPE / UGE Inventory Photo

26 square feet air fin heat exchanger
( 2 square meter air fin heat exchanger )

Stock Number: 211989    Capacity: 26 square feet / 2 square meter
Description: 2.4 square meter (26 square feet) copper tube/aluminium fin aftercooler with fan, type Hypercool, model ACA-032H/SPEC, air cooled, manufactured by Hiross S.P.A, serial #065620002, max pressure tube side 12 bar @ 150 degrees...

 

IPPE / UGE Inventory Photo

26 square feet air fin heat exchanger
( 2 square meter air fin heat exchanger )

Stock Number: 211990    Capacity: 26 square feet / 2 square meter
Description: 2.4 square meter (26 square feet) copper tube/aluminium fin aftercooler, type Hypercool, model ACA-032H/SPEC, air cooled, manufactured by Hiross S.P.A, serial #0656200, max pressure tube side 12 bar @ 150 degrees C (33.5...

Used Heat Exchangers & Used Condensers

Used Stainless Steel Heat Exchangers

Used Heat Exchangers and Used Condensers Heat exchangers are unfired heat transfer equipment used in process plants. Heat exchangers are used for the transfer of heat or cold between two fluids for the purpose of heating the process, cooling the process, or condensing vapors during the process. Heat exchangers are measured in Square Feet.

There are several different types of heat exchangers. These include:

  • Shell and Tube - Also called a condensers and calandrias depending on the service, this type of heat exchanger has external cylinder called a shell with internal tubes that run the length of the shell. There are tube sheets on each end of the tubes sealing the shell around the tubes. There are covers on each end called heads and these can come in several configurations. The shell side has a pressure and temperature rating and the tube side has a pressure and temperature rating. They can be vertical or horizontal. Basic principal of operation is that one fluid flows through the tube and the other fluid flows around the tubes. The fluid inside the tubes can flow in a single pass or multiple passes using baffles in the heads.
  • Graphite Exchangers - Graphite block exchangers are typically made from a solid block of graphite with parallel holes drilled at right angles. The blocks can be cylindrical or cube shaped. The blocks are typically stacked with gaskets in-between to product more square foot surface area. The blocks are inserted in carbon steel housing. Graphite shell and tube exchangers have graphite tubes and heads with Carbon Steel shells.
  • Plate Heat Exchangers - Plate exchangers consist of a series of alloy plates held together by a frame. The frame can be opened to add or repair the plates. One liquid flows through alternate plates and the other liquid flow the opposite direction through the opposite plates.
  • Spiral Heat Exchangers - Spiral exchanger are made from a pair of plates rolled to provide two relatively long rectangular passages for fluid in counter current flow. The spiral design is compact.
  • Fin Fan / Air Fin Exchangers - This type of exchanger has radial fins on the outside of the tubes to extend the heat transfer surface area. Tubes are mounted in horizontal banks, and multiple fans blow air across the outside of the tubes for cooling the process fluid inside the tubes.
  • Compoblock - This new type of heat exchanger is like a plate exchanger except the plates are welded together instead of gasketed, and the plates are mounted in a cube shaped shell like a graphite block exchanger. This type offers compact design, ability to use high alloys, and closed environment to prevent leaks.

GET IN TOUCH

Call us at (609) 586-8004 or CONTACT US