RegisterLogin
Need Help? or
Have something for sale? USE THIS FORM:
First Name:  
Last Name:  
Email Address:  
Company Name:  
Telephone:  
Country:  
Question:  
 
     

Chillers Minimize
1 of 10
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
 
  

 

Used Reactors

Used Reactor

All chemical processes are centered in the chemical reactor. A reactor is a vessel designed for internal pressure or vacuum, has a heat source typically an external jacket, and is agitated for proper mixing.

Reactors are made in all types of materials  including: Glass Lined Reactors, Glass Reactors, High Alloy Reactors,  Hastelloy Reactors, Stainless Steel Reactors, Titanium Reactors, Nickle Reactors, Monel Reactors, Duplex Stainless Reactors, Lead Lined Reactors.  The material of construction depends upon the corrosive nature and other chemical properties of the reactants. Jackets are used on reactors to eliminate the need for a heating coil.

Types of Jackets:

  • Conventional
  • Dimple Jacket
  • Half Pipe Coil Jacket

IPP has a large inventory of all materials of construction, configurations, and pressure and temperature ranges.

Manufacturers Include:  Acme, Acme Industrial, ADM, ADM Stainless, A-L, A-L Stainless, Allegheny Bradford, Allied Products, Allied Steel, Alloy Crafts, Alloy Fab, Alloy Industrial, ALLOY INDUSTRIES, Alloy Products, All-Weld, Alpha, APACHE, APACHE STAINLESS, Arrow Tank & Eng, Autoclave Engineers, B & G, B Braun, B&G MACHINE, B. Braun, BAEUERLE AND MORRIS, Baeurle & Morris, Bay Tank & Fabricating, BDC Engineering, Brighton, Brighton Corp, BUCHI, Buckley, BUCKLEY IRON WORKS, Buckly Iron Works, Camden Alloy Fab, Camden Copper, Central Fabricators, CHEMAP AG, Chemap Ltd, Cherry Burrell, CHERRY-BURRELL, D C I, DCI, DE DIETRICH, Dedietrich, Diessel, DUAL, Eagle Boiler, Echo, ECHO ENGINEERING, Estrella, FELDMEIER, Fluitron, FOUR CORP, G H Hicks, Gaston County, GH HICKS, Glascote, Graham, GRAHAM HART, GROEN, Harris Equipment, HERMANN WALDNER, Hofer, Industrial Copper, Industrial Welding, Inox Industries, ITT, ITT INDUSTRIES, J D Cousins, J.D. Cousins, JAMES BENDALL, James Russel, JAMES RUSSELL, JV Northewest, Kells, Kimberton, Kodak, Kopetz, Langfield Ltd, Lee Ind, Lee Industries, Lee Metal Products, Letsch, Lightnin (electric), List Discotherm, MEC, MEC Jaragua, Metal Arts Co., Mid South Maintenanc, Mid South Maintenance, MUELLER, Mueller Corp, MUELLER CORPORATION, Muller, New Brunswick, New Brunswick Scient, NEW BRUNSWICK SCIENTIFIC, NO, NOOTER BOILER, Nooter Corporation, Northland, Northland Stainless, NORTHLAND STAINLESS, Norwalk Fabricators, Nova, Offenhauser, Packo, PACKO INOX, Parr, Paul Mueller, Perry Products, Peterson, Pfaudler, PMP, POLYMETAL, Polymetal Manufacturing, Precision, PRECISION STAINLESS, Presicion, Pureflo, Purflo Precision, R & M Italia, Reynolds, Ritter, ROBEN, Robert Jenkins, Rothenburg, Saphire Engineering, Schleifenbaum & Weber, Schwarz, Schwarz Anlagentechnik, Schwelm, Scott Turbon, Speco, SRI, Stainless Fabricatio, STAINLESS FABRICATION, Stainless Steel, STAINLESS STEEL INDUSTRIES, T&C, Taylor, Taylor Tank, TCI SUPERIOR, Thermo Electron, titanium ind, Tolan, Toronto Coppersmithing, Trinity Industries, Tyco, Vessel Craft, Vesselcraft, Von Roll, WALKER, Walker Stainless, Walter Stocklin, Walter Storckling, WAUKESHA CHERRY-BURRELL, Westerman, Whiting Metals, Whiting Metals/ RECO, Zagata, Zeyon .

Equipment Search

Enter a product number or part of its description below and click SEARCH
  Search View Quote Contents

Finally, you may filter the results based on capacity below

    Narrow Results by Capacity

Add Checked to Quote
 Add to Quote Before Changing Page

346 Items ReturnedGo To Page: 12345678910...
  Stock NumberProductSub GroupCapacityDescription
Details
3316REACTORSTAINLESS STEEL800800 gal 316SS jkt agit autoclave/reactor. 60" dia x 48" str side, dished bolted top. Working pressure 284.5 psi and full vac int, 50 psi @ 572 deg F jkt. Openings: top 1-20", 1-8", 1-2 1/2", 2-1 1/2", 1-3/4"; btm 1-3" outlet. W/paddle agit. Not Code stamped.
Details
3317REACTORSTAINLESS STEEL800800 gal 316SS jkt agit autoclave/reactor. 60" dia x 48" str side, dished bolted top, cone btm. Not Code stamped. Working pressure 140 psi and full vac int, jkt pressure 50 psi @ 572 deg F. Openings: top 1-20", 1-8", 1-2 1/2", 1-3/4", 2-1 1/2"; btm 1-3" outlet. W/paddle agit.
Details
3391REACTORSTAINLESS STEEL600600 gal CS, shell 316SS Clad jacket reactor. Originally manufactured by Zimmer, Rerated tag by Bertrams, AG Serial # 62.990/30-1. 3'6" dia x 8'6" str side, cone btm to 2 1/2" outlet. Rated 7.1 psi @ 365 deg F, jacket re-rated 162 psi, at 362 degrees F. Openings: 2-8" side outlets near btm of cone to other 2 parts of melter, 2-10" in side.
Details
7424REACTORSTAINLESS STEEL 2525 gal 316SS jkt vert reactor body. 21" dia x 18" str side, open top, dish btm. Mfd by Bench Scale Equip, SN 3-30932-A, NB #48. Flush valve w/316SS ram seal. Int rated 150 psi and full vac @ 500 deg F, jkt rated 100 psi @ 500 deg F. 1-1 1/2" btm opening. Lug mtd.
Details
13079REACTORSTAINLESS STEEL 70" diameter 304 SS clad reactor cover. Dished heads. 8 bolt, 12 1/2" pattern for drive. 48 bolt holes to secure head. Openings: top center 1-8 3/4", 6-6", 1-7", 1-16" manway.
Details
15115REACTORSTAINLESS STEEL1750**** 1,750 gal 304SS clad vert jkt reactor. 6'6" dia x 6'6" str side, bolt dish top, dish btm. Full CS jacket. Mfd. by Industrial Process Engrs, National Board #322, SN 1950. Rated 45 psi @ 350 deg F. internal, 45 psi in jacket. Has top entering 2-speed drive with packing gland on shaft. Drive has 10/2.5 HP, 3/60/220/440 volt, 1160/570 rpm TEFC motor. 3" diameter shaft tapers at bottom with 8" diameter 3-blade propellor. SS thermowell in tank. Openings: top 2-19" manway with covers with swing bolts, 4-8"; bottom 1-3" center outlet with plug valve.
Details
18970REACTORSTAINLESS STEEL32003,200 gal 304SS reactor with helical ribbon agitator for viscous products. Dimple jacket. Manufactured by Cryochem Inc, Serial Number 1288. Internal rated FV/75 psi @ 550 degrees F; Jacket rated 165 psi @ 550 degrees F. Full Inconel 600 dimple jacket.7'6" dia x 9'6" str side, weld dish heads. Shell is 0.4375 " thick, Head is 0.78126" thick, Jacket shell and head is 0.105" thick. With a top mounted Lightnin agitator drive powered by Falk Fluid power drive, 150 HP, 3/60/460 volt, UL label, 6-28 rpm output. The internal agitator is an heavy duty helical ribbon agitator. Openings: top 2-6", 2-4", 2-8", 1-10", 16" x 24" manway w/cover, 1-30" pad for agitator; center btm outlet. Currently the vessle has Lugs and is mounted in an I beam support structure.
Details
19116REACTORSTAINLESS STEEL 30003,000 gal 321SS vaport tight reactor w/jkt and coils. 94" dia x 90" str side, flat bolted top, 53" deep cone btm 45 deg. 321SS tank and coils. Full CS jkt. Unit rated atmospheric int, 14.9 psi jkt. Unit has (27) turns of coil that extends into cone section. 366 sq ft of int coil, 589.099 linear ft, sch 10. W/top entering agit drive, approx 20 HP, packing gland on shaft and disk turbine agit. 3 1/2" dia agit shaft, w/8-blade 31" dia impellor, 144 rpm. 6" center btm outlet.
Details
20072REACTORSTAINLESS STEEL 10001,000 gal Pfaudler 304SS vert reactor. 60" dia x 7' str side, welded dished top and btm. SN E63500. Jkt rated 15 psi @ 350 deg F, int rated 200 psi @ 350 deg F. CS jkt with 1/4" x 8" support ring. Unit has 7.5 HP, 3/60/580 volt, 1740 rpm XP motor belt driving a propellor agit. 1-4" btm outlet.
Details
21401REACTORSTAINLESS STEEL22002,200 gal 347 SS reactor. 8' dia x 5'6" str side, bolt dish top, dish btm. Mfd by Nooter, SN N3543, NB #2625. 1/2 CS jkt. Jkt rated 175 psi @ 380 deg F, int rated 50 psi and full vac @ 400 deg F. 7/16" shell thickness; 3/4" thick jkt section. Bridge mtd agit drive w/Delco motor and gear reducer, 2-speed, 50/25 HP, 3/60/440 volt, 1750/880 rpm output. Anchor agit. Several top openings including 18" manway w/cover; approx. 4" center btm outlet. (4) lugs for mounting.
Details
21800REACTORSTAINLESS STEEL 10001,000 gal 304 LSS clad vert reactor. 6' dia x 4'6" str side, welded dish top and btm. Mfd by Superior Welding Co, NB #1002. Jkt rated 50 psi @ 300 deg F, internal rated 150 psi @ 300 deg F. W/4-blade pitched paddle agitator driven by Mdl MAP-30-231 Chemineer drive rated input rpm 1750, ratio 31.4:1, output rpm 56, no motor. Packing gland on shaft. Openings: top 5-6", 1-18" manway (no cover); side 1-4"; btm 1-6", 1-2". Mounts on (4) lugs.
Details
22017REACTORSTAINLESS STEEL22502,250 gal 304SS clad vert reactor w/heating coils. 78" dia x x 106" str side, weld dish heads. (2) banks, (11) turns of 3" ID coil, also single turn of coil around outlet. 15/10 HP Master XP motor, 1730/1150 rpm, 440 volt, 3/60, inline drive, packing gland on shaft. Openings: top 24" x 16" manwhole w/bolt cover, 1-6 1/4" nozzle, 2-2" nozzles, 3-1 1/2" nozzle, 1-1" plug, 1-4 1/2" sight glass. (1) 6-blade SS retreat recurve turbine; (1) 6-blade angle turbine; (4) baffles bolted to inner bank of coils.
Details
22018REACTORSTAINLESS STEEL22502,250 gal 304SS clad vert reactor w/heating coils. 78" dia x 106" str side, weld dish heads. (2) banks, (11) turns of 3" ID coil, also single turn of coil around outlet. 15/10 HP Master XP motor, 1730/1150 rpm, 440 volt, 3/60, inline drive, packing gland on shaft. Openings: top 24" x 16" manwhole w/bolt cover, 1-6 1/4" nozzle, 2-2" nozzles, 3-1 1/2" nozzle, 1-1" plug, 1-4 1/2" sight glass. (1) 6-blade SS retreat recurve turbine; (1) 6-blade angle turbine; (4) baffles bolted to inner bank of coils.
Details
25896REACTORSTAINLESS STEEL 20002,000 gal 316SS clad reactor body. 80" dia x 7' str side, weld dish top and btm. Mfd by Piersol-Pine, SN 2972, HSB #139. CS 1/2 pipe coil jkt rated 125 psi @ 350 deg F, int rated 75 psi @ 350 deg F. Openings: top 1-18" manway (no cover), 3-6", 4-8", 1-5" sight glass and 12" top center; 3" center btm outlet. Tank was altered by Ind Copper and Metal, SN 6629.
Details
26533REACTORSTAINLESS STEEL 2020 gal 304SS clad vert autoclave/reactor. 12" dia x 36" str side, bolt dish top, dish btm. Mfd by Lukens. Int rated 5,000 psi. Full CS jkt. Unit has approx 1 HP drive w/packing gland. Openings: top 1-6", 2-2", 1-1"; no btm outlet. Mounts on (4) lugs.
Details
27916REACTORSTAINLESS STEEL 150150 gal 304SS clad autoclave. 32" dia x 32" str side, weld hemi-top and btm. Full CS jkt on str side and btm. Unit has top entering Foote Bros agit drive w/89.7 rpm output, belt driven by 5 HP, 3/60/220/440 volt, 1750 rpm motor, UL label and variable sheave varispeed. Openings: top 1-18" center w/drive, 2-1", 1-6", 1-3"; no btm outlet. Unit mtd on (4) lugs.
Details
28184REACTORSTAINLESS STEEL 6060 gal 304SS reactor/evaporating pan body. 48" dia x 10" str side, clamped dished top, dished btm. Mfd by Pfaudler, ASME #6271. Rated 55 psi @ 700 deg F int, 78 psi @ 700 deg F in CS jkt. Openings: top 12" x 16" manway w/cover, 1-4" sight glass, 3-2", 1-6"; no btm outlet.
Details
29143REACTORSTAINLESS STEEL 425425 gal (1600 litres), 316SS reactor. 1300MM dia (51") x 850MM str side (33 1/2"), welded dished head. Mfd by Fried Krupp (W.Germany). Jkt rated 6 bar @ 150 deg C, int rated 6 bar and full vac @ 150 deg C. W/flat turbine agit driven by Renk Type HS-18 worm gear w/approx 3 HP motor. Packing gland. Openings: top 2-3" sight glass, 5-1", 1-1 1/2"; btm 1-2 1/2".
Details
30842REACTORSTAINLESS STEEL20002,000 gal 304LSS clad reactor. 60" dia x 13' str side. Mfd by Brighton, SN A-4283-A, NB #1907. Int rated 50 psi/full vac @ 122 deg F, jkt rated 100 psi/full vac @ 366 deg F. .1" thick 304LSS cladding. W/20 HP Lightnin agit, Mdl 319-REC, SN 689461, 84 rpm, 20.91 ratio. External pipe coil 3" dia, half CS pipe welded to OD of shell. Openings: top 1-4"; 1-3" center btm outlet.
Details
31454REACTORSTAINLESS STEEL 19001,900 gal 304SS clad reactor/fermentor w/int coils. 72" dia x 9' str side, weld dish top and btm. Mfd by Rohm and Haas Mfg, PA Std #3. Int rated 75 psi @ 600 deg F. Shell 1/4" thick, heads 1/2" thick. (2) sets 4" dia coils, (7) turns. Has bridge mtd Phila drive, Mdl 3511, w/75 HP drip-proof motor. Packing gland on shaft. Openings: top 1-8" with cover, 22" x 12" w/cover and 3" sight glass, 3-2", 1-3", 1-1"; side 1-3"; 3" center btm outlet.
346 Items ReturnedGo To Page: 12345678910...

Add Checked to Quote
 Add to Quote Before Changing Page
  

IPP Sales Contacts Minimize
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931
Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929
Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928
Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043
Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax
Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax
Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax
Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927

     

Home | About Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | News | Media | Contact Us
  Copyright 2002-2010 International Process Plants   Terms Of Use  Privacy Statement   
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association National Demolition Association Turnaround Management Association Association Memberships
Bookmark and Share

Follow Us On Twitter View Our Channel on YouTube