 |
|
Need Help? or Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207381
165 Ton @ -32 degrees F, Dunham Bush horizontal screw refrigeration package. Water cooled design. R22 Refrigerant. Compressor Model 2515/5.40, Horizontal Rotary Screw, rated 3550 RPM, direct coupled to a Siemens 600 HP, 3/60/460 volt motor. Evaprator is a 2 pas, 24" diamter x 176" long, (288) 3/4" x 0.049 x 176" long trufin tube carbon steel tubes; Condensor is a 2 pass, 18" diameter, x 153" long, (228) 3/4" x 0.028" x 153" long tubes, trufin copper tubes. All skid mounted with lubeoil system, and digital control panel. With Westinghouse starter WYE-Delta Closed Transition, NEMA-1 encloser floor mount. Unit dimensions are 212" L x 8"W x 116" H, 24,500 lbs.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
| 16 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 12259 | STILL | | 260 | **** 260 gal, 50 sq ft, Dupont 316SS short path wiped film evaporator. Mdl S-482. Body jkt, body 36" dia. Openings: top 1-2" feed inlet, 1-1"; side 2-3"; btm 1-2" residue outlet, 1-2" distillate outlet, 1-10". Material construction 304SS, top head is a flanged dish head of Carpenter 20, btm head is flanged and dish, unjkt, 316SS. Rotor and wiper entrainment section is made of 316SS. ASME stamped shell pressure full vac @ 500 deg F, jkt pressure 100 psi @ 500 deg F. #4 finish int. Int condenser, ASME stamped, tube rated full vac @ 500 deg F., shell rated 75 psi @ 500 deg F. Condenser includes (129) tubes. Rotor driven by U.S. synchro gear reducer, 1 1/2 HP, 3/60/550 volt, w/mech seal on shaft. Lugs for mounting. |
|
|
| 13161 | STILL | | 20 | 20 gallon Barnstead still and sterilizer. Has water purifier with 18" deep x 26" long tank with ultraviolet bacteria light, (2) Bantam demineralizers and small filter. Still: SN 94293, Model ELH3-HP, rated 3 gph, 7800 W, 3/60/208 volt. All skid mounted with controls. |
|
|
| 15759 | STILL | | 850 | 850 gal 316LSS still system. Mfd by Wyatt, SN C4753. Consists of: 850 gal 316 LSS tank, 42" dia x 11' str side, rated 352 psi, 11/16" thick. Tank has agitator in btm nozzle. And 183 sq ft 316 LSS vent condenser, rated 75 psi shell side, 350 psi tube side, CS shell w/(117) 3/4" x 8' long 316 LSS tubes. |
|
|
| 16457 | STILL | | 10 | 10 gal 316SS stillpot w/int coil. Mfd by Artisan Ind, SN 85613, NB #1692. Int rated 20 psi and full vac @ 450 deg F; coil rated 150 psi @ 500 deg F. Openings: top 1-6"; 2" btm outlet. Skirt mtd. |
|
|
| 40661 | STILL | | | **** 1,750 sq ft 309SS still system. Unit includes 1750 sq ft horiz 309SS reboiler (#40661X). Rated 30 psi @ 500 deg F shell, 600 psi @ 575 deg F tube side. Reboiler has spare U-tube bundle. Reboiler connects to 4' dia x 17'8" overall length packed column (#40662). 309SS w/316SS pall rings. |
|
|
| 87280 | STILL | | | Consolidated glass lab still. Type SBB-40. 115 volt, 24 amp. There are (2) variacs. Unitized. |
|
|
| 106300 | STILL | | 260 | ****260 gal, 50 sq ft, Dupont 316SS short path wiped film evaporator. Mdl S-482. Body jkt, body 36" dia. Openings: top 1-2" feed inlet, 1-1"; side 2-3"; btm 1-2" residue outlet, 1-2" distillate outlet, 1-10". Material construction 304SS, top head is a flanged dish head of Carpenter 20, btm head is flanged and dish, unjkt, 316SS. Rotor and wiper entrainment section is made of 316SS. ASME stamped shell pressure full vac @ 500 deg F, jkt pressure 100 psi @ 500 deg F. #4 finish int. Int condenser, ASME stamped, tube rated full vac @ 500 deg F., shell rated 75 psi @ 500 deg F. Condenser includes (129) tubes. Rotor driven by U.S. synchro gear reducer, 1 1/2 HP, 3/60/550 volt, w/mech seal on shaft. Lugs for mounting. |
|
|
| 109143 | STILL | | 100 | 100 gal 304SS still system. Consisting of (1) 100 gal horiz SS tank w/12" dia tube bundle thru (1) head. Mtd on saddles. (1) 12" dia x 27' long SS column. (1) 10" dia x 10' long condenser, mfd by Patterson Kelly, NB #182, SN 182. Shell rated 25 psi @ 400 deg F, tubes rated 75 psi @ 400 deg F. |
|
|
| 205509 | STILL | | 450 | 450 Gallon 304LSS distilation system with a horizontal tank with (2) vertical condensors and seperator tank. The horizontal surge tank is 450 gallons 304LSS 3'6" x 6'5" straight side. Mounted on top of tank is a vertical condenser rated 63,648 BTU/HR with u-tube bundle, and a second vertical condenser rated 73,195 BTU/HR with u-tube bundle. With this system is a 50 gallon seperator tank, 1'8" diameter x 3' straight side, welded dished top head, cone bottom with tangential opening on straight side. |
|
|
| 207509 | STILL | | 2802 | 2802 lbs./hr. capacity at a steam pressure of 87 psi, 316 SS, DI Water still, Finn Aqua, Model 1000HSG, manufactured by Santasalo-Sohlberg Corp, Serial number 34959, with (4) 316SS DI columns, skid mounted design, enclosed in a 304SS housing with associated pumps, valves, condensors, collection pots, and controls. Housingis 36" wide x 11' long x 11' high. |
|
|
| 207510 | STILL | | 176 | 176 lbs./hr.of pure steam generated at 58 psi, 316 SS, Clean Steam Generator, Finn Aqua, Model 2000H1, Manufactured by Santasalo-Sohlberg Corp, Serial number 34959, with (1) 316SS DI columns, skid mounted design, enclosed in a 304SS housing with associated pumps, valves, condensors, collection pots, and controls. Housingis 36" wide x 51" long x 11' high. |
|
|
| 207512 | STILL | | 1339 | 1339 lbs/hr based on 58 psi steam capacity,316 SS, DI Water still, Finn Aqua, Model 500H6, manufactured by Santasalo-Sohlberg Corp, Serial number 33928, with (5) 316SS DI columns, rated for maximun working pressure 116 psi at 347 degrees F, skid mounted design, enclosed in a 304SS housing with associated pumps, valves, condensors, collection pots, and controls. Housingis 36" wide x 7' long x 11' high. |
|
|
| 211267 | STILL | | 0 | MeCl2 48" x 6' Still system, with 316SS vessel approx 500 gallons, with four hot water exchangers in the reboiler pot. Reboiler is agitated by a bridge mount lightnin mixer, approximatly 1 hp. Hot water is supplied by a skid mounted system consisting of a 20 gallon 40" x 12" tank, a 3 x 2 x 10 Durco pump.(200 gpm @ 1786 rpm) Hot water system is steam fed. Condesing is by three Ketama heat exchangers, NB 779, Serial # V893676A, shell rated for 50 psi at 400 degrees F, tubes rated for 150 psi at 400 degrees F. Size 9B -90. |
|
|
| 211719 | STILL | STAINLESS STEEL | 264 | 1,000 liter, 1.4435 SS Kuhni Batch distillation system. Rated 2 bar @ 200 degrees C. System includes: 1000 liter 1.4435 SS, agitated, jacketed still pot, with anchor agitator. Mounted on top of still pot is a 450 mm diameter x 2950 mm high Kuhni 1.4435 SS packed Distillation Column; and a 4 SqM condenser. |
|
|
| 211747 | STILL | STAINLESS STEEL | 1000 | 1,000 liter, SS Kuhni Batch distillation system with 1000 liter SS agitated, jacketed still pot, with anchor agitator: 450 mm , Kuhni SS packed Distillation Column; and 2.5 SqM Spiral condenser and a 1 SqM condenser. |
|
|
| 705369 | STILL | | 12 | 45 liter 316SS water still system. Manufactured by OY Santaslo, Serial #413779E, Type #6-350. Distilliation process is performed at armospheric @ 100 degree C (212 degree F), distillate outlet temperature 70 degree C (158 degree F), steam is condensed into distillate by cold cooling water, slow steam speed with special baffle produces high distillate quality even from soft water, ventilation system to remove gasses from the steam, excess salts limited by adjustable bleed valve. System consists of (1) skid with (1) 45 liter boiler/tank, (1) 75 liter tank/condenser, (1) regulating tank, (1) free standing 480 liter pressure tank. (1) 45 liter 316SS boiler/tank, 420mm diameter x 350mm straight side, with 9.5 KW, 220/380 volt Loval immersion type heating element, element mounted on bottom of tank. (1) 75 liter 316SS tank/condenser with 12mm diameter xooling spiral, internal baffle. This tank mounts on top of boiler/tank. Openings: distillate 1-20mm, 1-12mm cooling water feed, 1-12mm cooling water outlet. (1) 316SS regulating tank. 625mm long x 325mm wide x 200mm deep with magnetic float/level switch, Type 862D-F40, 240/440 volt, 70 watt. (1) 480 liter 316SS vertical pressure tank. Manufactured by Olsa, Serial #1237. Rated 1 bar @ 120 degree C. 800mm diameter x 1000mm straight side, welded dished top and bottom. (4) turns on coil, (3) 75mm diameter x 700mm long SS tubes for heater elements mounted on bottom of straight side (no heater elements). Openings: top 1-180mm, 3-20mm (1 with probe and sensor, 1 with pressure gauge), 1-12mm; coil 2-20mm; bottom 1-50mm. Mounted on (4) legs. |
|
|
|
|
IPP Sales Contacts
|
 |
|
Keith West Global Sales KeithW@ippe.com +1 609 838 5931 | Amanda Vagell Global Sales AmandaV@ippe.com +1 609 838 5929 | Patti Buchman Global Sales PattiB@ippe.com +1 609 838 5928 | Ray Wagner Global Sales RayW@ippe.com +1 609 838 6043 | Regina Zarmer Europe Sales & Acquisitions ReginaZ@ippe.com +49-306-594-2445 Office +49-172-313-8439 Mobile +49-30-6594-2448 Fax | Jo Petrie, Sales Engineer UK, Scandinavia, Spain, & So.Africa jop@ippe.com +44 (0)1642 367 910 Office +44 (0)1642 367 913 Direct +44 (0)7770 748884 Mobile +44 (0)1642 367 920 Fax | Bohumil Cuta, E. Europe Sales & Acquisitions BohumilC@ippe.com +42-054-821-6680 Office +42-060-273-7517 Mobile +420-5-481-22240 Fax | Elisa Lucumi Central & So. America Sales ElisaL@ippe.com +1 609 838 5927
|
|
|
|
|
|
|
|