 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
|
| Stock Number | 79065 |
| PG | SYSTEMS |
| SG | RECOVERY |
| SSG | SOLVENT |
| Capacity | 6 |
| Product Description | 6 tons/day CS solvent recovery plant. Mfd by Union Carbide, Carbone Div, Type "Columbia". Consisting of (4) 7'6" dia x 6'6" CS activated carbone beds. Mtd on (2) decks. Mfd by Penn Furnace Co, SN: 47014-C1-1; 47014-C1-2; 47014-C2-1; 47014-C2-2. Rated 50 psi @ 650 deg F. W/(2) 16" side openings for removing and adding carbon. All auxiliaries are mtd on CS deck w/(1) CS centrifugal blower, blt by Amer Blower, Mdl RB, Size 38. 20" inlet, 21" x 10" outlet. Max required air flow 6000 cu ft/min. (7) Worthington air compressors, Mdl EU-322A, Size 6-3-1/2 x 2-3/4, driven by 10 HP, 220/440 volt, 1750 rpm motor, UL label. Used for control air. (1) filter housing for filtering inlet gas, w/Trane steam coil. Max 120 psi @ 650 deg F. (1) approx 250 sq ft condenser for cleaned gas and water vapor. Mfd by Camden Alloy, NB #1518, SN 78-7521. Recovery tank 4' dia x 4' str side, approx 380 gal. Unit is fully automatic. Recovery cycle for 500 lbs/hr is 26 mins. |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|