 |
|
Need Help? or Have something for sale? Use this:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below...
Finally, you may filter the results based on capacity below
| 4 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 36709 | SYSTEMS | RECOVERY | | Parker Hannifin vapor recovery system. Consisting of (1) 3,500 gal vert CS tank, 8' dia x 9'6" str side, flat top and btm. Mfd by Thompson, SN 1566. Rated 65 psi @ 650 deg F. (1) 150 gal horiz CS tank 30" dia x 9'6" str side. (1) 600 gpm @ 90' TDH, Borg Warner inline centrifugal pump w/20 HP, 3/60/230/460 volt motor, UL label. (1) Allis Chalmers CS rotary blower rated 536 cfm w/10 HP, 3/60/460 volt, 1135 rpm TEFC motor. (1) 10 HP inline centrifugal pump. (1) 5 HP inline centrifugal pump. All skid mtd. |
|
|
| 79065 | SYSTEMS | RECOVERY | 6 | 6 tons/day CS solvent recovery plant. Mfd by Union Carbide, Carbone Div, Type "Columbia". Consisting of (4) 7'6" dia x 6'6" CS activated carbone beds. Mtd on (2) decks. Mfd by Penn Furnace Co, SN: 47014-C1-1; 47014-C1-2; 47014-C2-1; 47014-C2-2. Rated 50 psi @ 650 deg F. W/(2) 16" side openings for removing and adding carbone. All auxiliaries are mtd on CS deck w/(1) CS centrifugal blower, blt by Amer Blower, Mdl RB, Size 38. 20" inlet, 21" x 10" outlet. Max required air flow 6000 cu ft/min. (7) Worthington air compressors, Mdl EU-322A, Size 6-3-1/2 x 2-3/4, driven by 10 HP, 220/440 volt, 1750 rpm motor, UL label. Used for control air. (1) filter housing for filtering inlet gas, w/Trane steam coil. Max 120 psi @ 650 deg F. (1) approx 250 sq ft condenser for cleaned gas and water vapor. Mfd by Camden Alloy, NB #1518, SN 78-7521. Recovery tank 4' dia x 4' str side, approx 380 gal. Unit is fully automatic. Recovery cycle for 500 lbs/hr is 26 mins. |
|
|
| 107979 | SYSTEMS | RECOVERY | | 2,500 cfm vapor recovery system. Manufactured by Vara International, Protect #PC10089, Equip #1101. Major components include: (2) 2400 gallon vertical 316SS tanks, welded dished top, flat bottom. Openings: top 1-30", 1-3"; side 1-18" manway with bolt cover, 1-8" with pneumatic butterfly valve. (1) 150 gallon horizontal 316SS tank, flat heads. Openings: top 1-1"; head 1-1 1/2", 1-1"; bottom 1-1 1/4", 1-1". (1) 284 square feet 316SS tubes and shell, CS head heat exchanger. Manufactured by Doyle and Roth, Serial #J4386, National Board #12463. Shell side rated 75 psi @ 450 degree F, tube side rated 75 psi @ 450 degree F. (136) 1" OD x 8' long tubes. Openings: tube side 2-3", 1-6"; shell side 1-3", 1-2 1/4" threaded nozzles. (1) 12" diameter x 6'6" long fiberglass stripper system with 1 HP blower and 1 HP circulation pump. Mounted in cabinet. (1) 400 gallon 316SS vertical tank with flat 1/2 hinged top and flat bottom. Has approx 30 square feet bayonette heat exchanger. (1) 300 gallon horizontal 316SS tank, flat heads. (1) 7 1/2 HP New York CS blower. (1) steam coil. |
|
|
| 109885 | SYSTEMS | RECOVERY | | 24" x 27' long solvent recovery system. Includes item # 109882 - scrubber, 24" x 27' column packed with Plastic Pall rings and structured woven packing, (as mist eliminator) at the top head. 316SS, 3" center bottom outlet. Mounted with 4 legs. Welded dished top and bottom. Top opening: 2-3". Side opening: 1 1/2". #109883 -350 cfm exhaust fan blower MFD by: American Fan Co, 3500 rpm. Model # 1E-9-4H, Serial # 971563A. Direct driven 10/5 hp motor, 3/60/460, 3515 TEFC. #109884 - SS heat exchanger MFd by: Ind. Process Equip. Co., 1997, Model # MST10-120, Serial # 701-2200. NB# 1976. 75 psi @ 440 deg. shell side, 72 @ 240 deg. tube side. 10' tubes, 10", 1 bonnet, 1 dish. Tube side opening: 2-2". Shell side openings: 1-4", 1-8". |
|
|
|
|
|
|
|