New search | Used SYSTEMS

8 Items Returned Go To Page: 1
		Stock Number	Product	Sub Group	Capacity	Description
Select		20725	SYSTEMS	GLYCOL		UNUSED glycol plant. Consisting of (1) prepiped skid, water knock-out drum; 1914 gal storage tank; (2) vert condensers; acid knock-out drum. Each skid contains (2) Union piston pumps; (3) heat exchangers; (1) reboiler reflux drum; (2) Nash vac pumps; (1) glycol horiz tank; (1) Perry filter; (2) Union centrifugal pumps.
Select		36709	SYSTEMS	RECOVERY		Parker Hannifin vapor recovery system. Consisting of (1) 3,500 gal vert CS tank, 8' dia x 9'6" str side, flat top and btm. Mfd by Thompson, SN 1566. Rated 65 psi @ 650 deg F. (1) 150 gal horiz CS tank 30" dia x 9'6" str side. (1) 600 gpm @ 90' TDH, Borg Warner inline centrifugal pump w/20 HP, 3/60/230/460 volt motor, UL label. (1) Allis Chalmers CS rotary blower rated 536 cfm w/10 HP, 3/60/460 volt, 1135 rpm TEFC motor. (1) 10 HP inline centrifugal pump. (1) 5 HP inline centrifugal pump. All skid mtd.
Select		79065	SYSTEMS	RECOVERY	6	6 tons/day CS solvent recovery plant. Mfd by Union Carbide, Carbone Div, Type "Columbia". Consisting of (4) 7'6" dia x 6'6" CS activated carbone beds. Mtd on (2) decks. Mfd by Penn Furnace Co, SN: 47014-C1-1; 47014-C1-2; 47014-C2-1; 47014-C2-2. Rated 50 psi @ 650 deg F. W/(2) 16" side openings for removing and adding carbone. All auxiliaries are mtd on CS deck w/(1) CS centrifugal blower, blt by Amer Blower, Mdl RB, Size 38. 20" inlet, 21" x 10" outlet. Max required air flow 6000 cu ft/min. (7) Worthington air compressors, Mdl EU-322A, Size 6-3-1/2 x 2-3/4, driven by 10 HP, 220/440 volt, 1750 rpm motor, UL label. Used for control air. (1) filter housing for filtering inlet gas, w/Trane steam coil. Max 120 psi @ 650 deg F. (1) approx 250 sq ft condenser for cleaned gas and water vapor. Mfd by Camden Alloy, NB #1518, SN 78-7521. Recovery tank 4' dia x 4' str side, approx 380 gal. Unit is fully automatic. Recovery cycle for 500 lbs/hr is 26 mins.
Select		89094	SYSTEMS			960 cfm Detrex activated carbon bed for removal of trichloroethylene vapors from air stream. Mdl SVRM-3-3.5-960, blt 1992. Skid mtd system in (3) sections. Main section has (3) 3' dia x 8' high approx 304SS activated carbon module vessels. They are insulated w/approx 2" thick insulation and covered w/sheet metal wrap. Includes connecting ductwork and piping w/valves. Sen Dure condenser, SN 270087, 5" dia x 24" long of copper construction w/2-2" openings on shell side and tube side. Condenses water and solvent during the stripping/carbon regeneration cycle. There is 10" dia x 38" high 316SS water separator to remove water from the recovered solvent. Also included on this skid is 38" wide x 12" dia x 48" high control panel. Control panel contains an Allen Bradley programmable controller and graphic display depicting system schematics w/indicator lamps designating system operation parameters and alarm conditions. This skid 192" long x 65" wide x 148" high. 2nd skid is 64" long x 52" wide x 60" high and contains an air handling blower rated 960 cfm, driven by 3 HP motor and belt drive; cool-down 550 cfm fan driven by 2 HP motor and V-belts; 15" dia x 24" high 316SS solvent recovery tank w/Dunham and Bush bronze 2x1-1/4" pump, driven by direct connected 3/60/208-230/460 volt, 3450 rpm motor. 3rd skid is 52" wide x 86" long x 55" high. This is a waste water treatment system consisting of a compartmented tank w/(3) Bell and Gossett SLC-30 circulators powered by 1/60/115 volts. Also included w/unit are (2) steam condensate recovery tanks w/pumps: (1) 15" x 15" x 10" high cast iron tank w/pump powered by 1/3 HP, 1/60/115/230 volt, 3450 rpm motor; (1) 15" x 9" x 10" high cast iron tank w/pump powered by 1/3 HP, 1/60/115/230 volt, 3450 rpm motor. Activated carbon not included.
Select		107979	SYSTEMS	RECOVERY		2,500 cfm vapor recovery system. Manufactured by Vara International, Protect #PC10089, Equip #1101. Major components include: (2) 2400 gallon vertical 316SS tanks, welded dished top, flat bottom. Openings: top 1-30", 1-3"; side 1-18" manway with bolt cover, 1-8" with pneumatic butterfly valve. (1) 150 gallon horizontal 316SS tank, flat heads. Openings: top 1-1"; head 1-1 1/2", 1-1"; bottom 1-1 1/4", 1-1". (1) 284 square feet 316SS tubes and shell, CS head heat exchanger. Manufactured by Doyle and Roth, Serial #J4386, National Board #12463. Shell side rated 75 psi @ 450 degree F, tube side rated 75 psi @ 450 degree F. (136) 1" OD x 8' long tubes. Openings: tube side 2-3", 1-6"; shell side 1-3", 1-2 1/4" threaded nozzles. (1) 12" diameter x 6'6" long fiberglass stripper system with 1 HP blower and 1 HP circulation pump. Mounted in cabinet. (1) 400 gallon 316SS vertical tank with flat 1/2 hinged top and flat bottom. Has approx 30 square feet bayonette heat exchanger. (1) 300 gallon horizontal 316SS tank, flat heads. (1) 7 1/2 HP New York CS blower. (1) steam coil.
Select		109885	SYSTEMS	RECOVERY		24" x 27' long solvent recovery system. Includes item # 109882 - scrubber, 24" x 27' column packed with Plastic Pall rings and structured woven packing, (as mist eliminator) at the top head. 316SS, 3" center bottom outlet. Mounted with 4 legs. Welded dished top and bottom. Top opening: 2-3". Side opening: 1 1/2". #109883 -350 cfm exhaust fan blower MFD by: American Fan Co, 3500 rpm. Model # 1E-9-4H, Serial # 971563A. Direct driven 10/5 hp motor, 3/60/460, 3515 TEFC. #109884 - SS heat exchanger MFd by: Ind. Process Equip. Co., 1997, Model # MST10-120, Serial # 701-2200. NB# 1976. 75 psi @ 440 deg. shell side, 72 @ 240 deg. tube side. 10' tubes, 10", 1 bonnet, 1 dish. Tube side opening: 2-2". Shell side openings: 1-4", 1-8".
Select		111055	SYSTEMS			The membrane cell electrolysis system is designed for manufacturing H3P02. Hypo Acid). Water, electricity and NaHYPO is fed into the cell system, 02 and H2 are removed separately, H3P02 are the product. The entire system was supplied in 1998. The capacity is 706 TPY with a down time of 15%. So it means a practical capacity of 600 TPY. It was supplied by Aqua Tech Cell. The electrodialysis is as follows: The treated salt solution is processed in the Aqualytics electrodialysis system. The process is made up of the following components: * The process area, where the process equipment and instrumentation are located. * The power supply, which supplies DC power the cell stack skid. * Cell stack skid which contains the membranes; The Aqualytics system requires deionized water feed (included). Deionized water is supplied from a unit that is fed cooled (<38 degrees C) steam condensate water from a sodium hypophosphite evaporator steam chest. The Aqualytics system requires a purified sodium hypophosphite solution feed. Sodium hypophosphite solution is passed through the CSK cation exchange system, where hardness ( Calcium or Magnesium) is removed to <1ppm total hardness. The aqualytics system employs the use of: * A bipolar membrane. * An Anion selective membrane. * A Cation selective membrane. The entire system consists of the following components: -150 gallon HOPE tank for 15% Hype Acid, Mfg. by Chem Tamer. -Acid pump, made of PP size 1 1/2 x 1 1/2, rated 45 GPM, driven by 1 HP 3160/460V 3600 RPM motor. -Acid filter, (north), Mfg by Trumpler- Clancy/ Filtrite, made of PPrated 20 GPM c~ 125 PSI, with 10 micron cartridge. -Acid filter (south), identical to the one above. -NaOH base tank, made of HDPE, Mfg by Chem- Tamer, 55 gallons. -Base pump, Mfg by Pertech mdl MDH 401 CV6, rated 45 GPM c~ 46 TDH, driven by 1 HP 3/60/460V 3600 RPM motor. -Base cooler, 22.6 Sq. Ft. plate heat exchanger, 316SS, Mfg. by Alfa Laval, rated 92500 BTU/Hr. -Base filter, (west), made of PP, Mfg. by Trumpler- Clancy/ filtrite, with 10 micron cartridge, rated 20 GPM (~ 125 PSI. -Base filter (east), same as above. -Salt tank, made of HOPE, 55 gallons, Mfg by Chem Tamer. -Salt pump, made of PP, rated 45 GPM c~ 46 TDH, Mfg by Pertech MDH 401 CV6, driven by I HP 31601460V 3600 RPM motor. -Salt Filter (south), made of PP, Mfg. by Trumpler- Clancy, rated 20 GPM C~ 125 PSI, with 10 micron cartridge. -Salt filter (north), same as above. -Salt cooler, 22.6 Sq. Ft. 316 SS plate heat exchanger, mfg by Alfa Laval, rated 92580 BTU/ Hr. -Cathode rinse tank, made of HOPE, 15 gallons, Mfg by Chem tamer. -Cathode rinse pump, made of PP, Mfg by Pertech, MDH400CCVY, rated 14 GPM (~ 23 TDH, driven by 112 HP, 3160/460V 3500 RPM motor. -Cathode rinse filter, made of PP, rated 20 GPM @ 125 PSI, Mfg. by TrumplerClancy, with 10 micron cartridge. -Anode rinse tank, made of HOPE, 30 gallon, Mfg by Chem-Tainer. -Anode rinse pump, made of PP, Mfg by Pertech, type MDH400CCVy, rated 14 GPM @ 23T0H, driven by 1/2 HP 31601460V, 3500 RPM motor. -Anode rinse filter, made of PP, Mfg by Trumpler- Clancy, rated 20 GPM @ 125 PSI, with 10 micron cartridge. -Caustic mix tank, made of HOPE, 10 gallons, Mfg by Chem Tamer. -Cell Stack power supply, 250V0C1 600 A. - Cell stack mfg. by Aqualytics with a cell monorail hoist.
Select		206752	SYSTEMS	CARBON STEEL	1200	1,200 gallon carbon steel tank, manufactured by Plant Maintenance Services Corp. in 1999. National Board number 4384. Serial #AB625. MAWP is 15 psi at 212 degrees F. MDMT is -20 degrees F @ 15 psi. Tank has a hemi style head and a dish bottom. Diameter is 6' by 8' 6" long.