 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207381
165 Ton @ -32 degrees F, Dunham Bush horizontal screw refrigeration package. Water cooled design. R22 Refrigerant. Compressor Model 2515/5.40, Horizontal Rotary Screw, rated 3550 RPM, direct coupled to a Siemens 600 HP, 3/60/460 volt motor. Evaprator is a 2 pass, 24" diamter x 176" long, (288) 3/4" x 0.049 x 176" long trufin tube carbon steel tubes. Condensor is a 2 pass, 18" diameter, x 153" long, (228) 3/4" x 0.028" x 153" long tubes, trufin copper tubes. All skid mounted with lubeoil system, and digital control panel. With Westinghouse starter WYE-Delta Closed Transition, NEMA-1 encloser floor mount. Unit dimensions are 212" L x 8"W x 116" H, 24,500 lbs.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Tanks - Used Processing EquipmentUsed tanks are carbon steel vessels with enamel or glass coating on the wetted parts, combining the corrosion resistance of glass with the working strength of steel. We have hundreds of used stainless steel tanks available in various sizes and capacities. The type of glass that is used is very resistant to many types of corrosive materials that would corrode alloy material. The major manufacturers of glass lined vessels include Pfaudler, Pfaudlers Edlon, DeDietrich, Tycon, and Ceramic coatings.  Tanks are vessels that hold liquids. They can be vertical or horizontal, rated for pressure or just atmospheric pressure, agitated or just for storage.
See Below for Used Tanks including High Alloy Tanks
|
|
IPPE Equipment Seach
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 8 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 12459 | TANK | EPOXY LINED | 1300 | 1,300 gal FEP lined vert pressure tank. 4'6" dia x 11' str side, flat bolt top, flat btm. Mfd by Carborendum. Int rated 75 psi @ 150 deg F. FEP lining .090" thick. Openings: top 3-3"; side 10-3", 1-18" manway w/cover; btm 1-3". Lug mtd 6" off ground. |
|
|
| 12460 | TANK | EPOXY LINED | 1300 | 1,300 gal FEP lined vert pressure tank. 4'6" dia x 11' str side, flat bolt top, flat btm. Mfd by Carborendum. Int rated 75 psi @ 150 deg F. FEP lining .090" thick. Openings: top 1-3"; side 8-3", 1-18" manway w/cover; btm 1-3". Lug mtd 6" off ground. |
|
|
| 29967 | TANK | EPOXY LINED | 2000 | 2,000 gal Kynar lined horiz storage tank. 84" dia x 72" str side, weld dish heads. Mfd by DeDietrich, SN 31223, NB #1954. Int rated 30 psi/full vac @ 400 deg F. Openings: top 1-18" w/cover, 2-3", 1-8", 1-6"; btm end 1-3". |
|
|
| 38725 | TANK | EPOXY LINED | 1000 | 1,000 gal Steelcote lined horiz pressure tank. 40" OD x 12'8" str side, weld hemi-heads. Mfd by Trinity Ind, NB #114740. Rated 250 psi @ 125 deg F. Openings: 1-16" manway, 3-1", 1-3/4". |
|
|
| 75229 | TANK | EPOXY LINED | 6000 | 6,000 gal vert epoxy lined/CS agit tank. 9' dia x 12' str side, 304SS bolt flat top, dish btm. Flange mtd Moduflux agit drive, Mdl MDP-100-526, SN 1-17877-4, 25.6:1 ratio, 68 rpm output. No gland or seal. Driven by 10 HP, 3/60/460 volt, 1750 rpm motor, UL label. (2) 304SS 4-blade impellors. Has (4) int plate coils 12" wide x 5' long. Openings: top 1-24" square, 1-3"; btm 1-2". |
|
|
| 75234 | TANK | EPOXY LINED | 2400 | 2,400 gal vert epoxy lined/CS tank w/coil. 7' dia x 8' str side, solid 304SS bolt flat top, dish btm. Bridge mtd Chemineer Mdl CBB-30-420 agit drive, 87 rpm output. No gland or seal. Driven by 3 HP, 3/60/230/460 volt, 1730 rpm TEFC motor. 7' dia x 8' long 304SS shaft w/304SS 4-blade pitched paddle impellor. Openings: top 24" x 24" (no cover). |
|
|
| 212592 | TANK | EPOXY LINED | 26000 | 26,000 Gallon, CS with epoxy coating, vertical storage tank. Flat welded bottom, open top, 15' daimeter x 20' straight side. Manufactured by Fisher Tank Co. Serial # 50569. Rated for design pressure atmospheric, specific gravity, 1.3; 200 degrees F. Manufactured to API Standard (650). With side stairs to top platform, and 3 hp Chemineer agitator, Model # 3 HTD-3, with a stainless steel impeller. |
|
|
| 705384 | TANK | EPOXY LINED | 17 | 64 liter halar lined vertical, 3 bar jacketed agitated pressure tank. 430mm diameter x 450mm straight side, clamp flat top, welded dished bottom. Manufactured by Seriaco Ltd, Serial #923513, built 1993. Internal rated 3 bar @ 20 degree C. 316SS straight jacket. Staro drive, Model #1FL2ESLEX, Serial #931021. Direct driven by 0.75 KW, 3/50/220/380 volt, 1420 rpm Exp motor. 4-blade turbine agitator and (3) internal halar lined baffles on sidewall. Openings: top 2-80mm (1-sight glass), 3-50mm, 4-32mm; jacket 3-18mm; bottom 1-50mm. (3) SS legs. |
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|