 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Tanks - Used Processing EquipmentUsed tanks are carbon steel vessels with enamel or glass coating on the wetted parts, combining the corrosion resistance of glass with the working strength of steel. We have hundreds of used stainless steel tanks available in various sizes and capacities. The type of glass that is used is very resistant to many types of corrosive materials that would corrode alloy material. The major manufacturers of glass lined vessels include Pfaudler, Pfaudlers Edlon, DeDietrich, Tycon, and Ceramic coatings.  Tanks are vessels that hold liquids. They can be vertical or horizontal, rated for pressure or just atmospheric pressure, agitated or just for storage.
See Below for Used Tanks including High Alloy Tanks
|
|
IPPE Equipment Seach
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 13 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 26423 | TANK | EXOTIC ALLOYS | 160 | 160 gal 400 series SS vertical tank. 3' dia x 3' str side, flat top, dish btm. Mfd by Edgemoor Iron. Rated atmospheric. W/1 HP Lightnin side mtd agit. (3) leg supprts. |
|
|
| 74779 | TANK | EXOTIC ALLOYS | 8500 | 8,500 gal vert titanium clad, 425 psi pressure tank. 9' dia x 16' str side, weld hemi-top, weld hemi-btm. Mfd by Nooter, NB #6938, SN C-176A. Int rated 425 psi @ 650 deg F. Openings: top 1-16", 6-6", 1-4", 2-1 1/2", 1-10", 3-2"; side 1-20" manway; 8" center btm outlet. (4) welded lugs. |
|
|
| 102528 | TANK | EXOTIC ALLOYS | 65 | 65 gal nickel vert, 50 psi pressure tank. 20" dia x 46" str side, weld dish top and btm. Mfd by Lipton, SN 76-5094, NB #100. Int rated 50 psi @ 150 deg F. Openings: top 1-2", 3-1"; side level indicator; 1 1/2" center btm outlet. (3) CS legs. |
|
|
| 106200 | TANK | EXOTIC ALLOYS | 450 | 450 gal nickel clad vert storage tank. 4' dia x 5' str side, flat top, slope btm. 3-3" in top, 2" btm outlet |
|
|
| 206205 | TANK | EXOTIC ALLOYS | 4700 | 18 Cu meter vertical agitated high alloy (titanium) pressure tank, manufactured by Permascand/Sweden, Serial Number 9417,internal pressure -1/4bar @ 143 degrees C, total volume 20 Cu meter. 2500mm diameter x 3.4m straight side, 4890mm total height. Top mounted agitator drive, (3) sets of 2-blade pitched paddles on shaft, driven by a 11 KW 3/50/380/400/680, 1440 rpm. baffles on sidewall, Openings include: top 1-500mm manway with cover, 1-200mm, 1-150mm, 2-100mm, 2-80mm, 8- 50mm, bottom: 1-100mm. Mounted on lugs on the CS support frame |
|
|
| 206206 | TANK | EXOTIC ALLOYS | 980 | 3.4 Cu meter Titanium vertical agitated vacuum tank with (2) panel coil jackets on straight side. Mfg by Permscand(Sweden), Serial Number 9307, Pressure Code TKN1987 (Sweden), rated -1/1 bar @ -20 to 120 degrees C, dished top and bottom, 1900mm diameter x 2300mm straight side. Top mounted agitator drive 2.5KW. Openings include: Top - (1) manway with cover, sight glass, and Bottom outlet. Mounted on lugs |
|
|
| 206658 | TANK | EXOTIC ALLOYS | 1650 | 1650 Gallon Monel 400 horizontal storage tank, Manufactured by Enerfab, National Board Number 1831, Serial Numbwer 9713571, Rated 80 PSI @ 300 degrees F. 54" diameter x 168", welded dished heads. Openings include: Top - (1) 18" manway with bolted cover, (2) 4" openings. There are (3) reinforcing rings along straight side of tank. Mounted on CS saddles.
CS saddles sit on four stainless steel load cells.(tank can be used as a scale) |
|
|
| 207581 | TANK | EXOTIC ALLOYS | 1200 | 1200 Gallon, Carpenter 20, agitated 50 psi Tank, Manufactured by Gaston County, Serial Number F41693-383-1, National Board number 16500, Rated 50 psi @ 320 degrees F internal. 60" diameter x 7' straight side, welded dished top and bottom. Shell is .1875" thick, Heads 0.250" thick. With top mounted Philadelphia mixer, 31.4 to 1 ratio, direct coupled to a 5HP 3/60/230/460 volt, Reeves varidrive. Packing Gland on shaft, (4) 4 blade straight paddles, 4 baffles on sidewalls . Openings include: Top - (1) 18" manway with SG in cover, (5) 2", (1) 1", (1) 4" Sightglass; Bottom - (1) 3" outlet. Mounted on 4 legs. |
|
|
| 210810 | TANK | EXOTIC ALLOYS | 50 | 50 Gallon, Hastalloy C-22 vertical tank, with a 304 SS sanitary isulation jacket, mounted on 36" pipe legs. Diameter is 24" x 24" straight side, with welded dish heads. Manufactured by Northland Stainles, Serial #905259, NB# 1056. Shell rated for 75/FV at 400 degrees F, MDMT rated for -20 at 75/FV. Shell and head thickness is 0.109. Top openings are two 3" and two 1". Center bottom opening is 2". Side openings are one 6", two 3", and two 1". |
|
|
| 210853 | TANK | EXOTIC ALLOYS | 2300 | 11,200 ltr Inconel 600 vertical tank, rated 3.5 bar (0.35 MPa) @ 135 degrees C, total volume 13,300 liter, mfd by M.LABBE - France, 2.4 m diameter x 2,1m straight side, welded dished top and bottom. Openings top: 2x450mm manway, 4x50mm, 4x200mm, 2x150mm, 1x400mm; side wall:4x150mm, bottom outlet=1x560mm, Reinfrocing rings around outside of tank. Mounted on c/steel support ring with 3 lugs, total weight 3615 kg |
|
|
| 216086 | TANK | EXOTIC ALLOYS | 175 | 175 Gallon, NI200(nickel), vertical storage tank(sparger) mounted on legs. 24" diameter x 90" straight side with welded dish heads. Manufactured by Benicia Fabrication & Machine Co., serial # 05-2081, NB # 1600. Rated for 180 psi at 400 degrees F. Two 12" hand ways, 4" center top & bottom openings, 1-1" side opening, and one 4" side opening. |
|
|
| 216120 | TANK | EXOTIC ALLOYS | 3470 | 3470 Gallon, Hastelloy C-276, vertical tank, mounted on lugs. 7' 6" diameter x 8' straight side, with welded hemi heads. Repair tag, 2000, rated for 180 psi at 270 degrees F.12" center top opening, one 8" top opening, two 3" side bottom nozzles, and one 12" center bottom outlet. 18" side manway with davit arm. Shell thickness is minimum 0.336". With Hastelloy B Eductor, 8" diameter x 90" long. Rated for 180 psi at 200 degrees. |
|
|
| 220133 | TANK | EXOTIC ALLOYS | 6200 | 6200 Gallon Nickel 200, vertical tank, manufactured by Pittsburg Coke & Chemical Company. 90" diameter x 17'6" straight side, dished top, flat bottom. With CS support rings around straight side of tank. Side wall is 3/16" thick; bottom head is 3/8" thick. Openings include: Top - (1) 18" with cover, (4) 4"; top side (1) 2"; side bottom (1) 4" outlet. ` |
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|