New search | Used TEXTILE

6 Items Returned Go To Page: 1
		Stock Number	Product	Sub Group	Capacity	Description
Details Add to Quote		217361	TEXTILE		0	Fiber Industries Spin Pack Pre-Heater cabinet. 304SS construction, heated by Dowthem Vapor, with Vapor Phase Dowtherm manifold. Unit pre-heats the spinning packs prior to start of spin process. Holds 24 spin packs.
Details Add to Quote		217363	TEXTILE		0	24 Station Fiber Spinning System, designed for (24) Spinnerette packs, 24 air quech tubes, and a tow take-off system. ICI designed spinning system, each station has a Zenith pump for pumping hot melt into the spin pack, the spun filber strands run down an air quench tube with a ceramic ring for applying finish to the strands, with a device to remove slub from the fibers. The fiber tow is collected along a 304SS trough with a lubricant bath that runs the length of the spin beam. The tow runs through take off rolls manufactured by Fleissner, into nip rolls that feed a SS osscillating piddler tube that fills fiber tow cans for storage prior to drawing and finishing. Spin System includes Hoffman Blower, a de-humidifier, (24) spin packs, and chill water coil.
Details Add to Quote		217418	TEXTILE		0	Polyester Fiber Draw Line including an overhead creel that pulls tow from 32 to 40 stored fiber tow cans into 2 band that flow into a pre-draw 304Ss bath basin, inot (7) ceramic coated feed rolls with finish spray heads. Tow then travels into nip rolls that feed the steam heated draw rolls. From draw rolls tow tavels inot a pre-tension stand to draw tension before entering the crimper.
Details Add to Quote		217419	TEXTILE		0	Neumag Crimper, heavy duty Model NKR 8-36, Type 659 988.2, Serial number 90.0670.40.01. Designed for tow to travel right to left. Crimp roll diameter 200 mm, crimp box is 30 mm wide, crimp box height is 28mm, with Pneumatic cylinder for crimp roll.
Details Add to Quote		217421	TEXTILE		0	366 meters/min, CS, Lummus fiber cutter Model Mark V, in both right hand and left hand models. Serial # 7-007-0439-6-LH. Staple cut length can be changed by varying the cut wheels. No limit on filiment denier with this cutter. Driven by a 20 Hp electric motor with panel mounted controls. Overall dimensions are 76" wide x 8' long x 8' high.
Details Add to Quote		217448	TEXTILE		0	366 meters/min, CS, Lummus fiber cutter Model Mark V, in both right hand and left hand models. Serial # 7-007-0439-6-LH. Staple cut length can be changed by varying the cut wheels. No limit on filiment denier with this cutter. Driven by a 20 Hp electric motor with panel mounted controls. Overall dimensions are 76" wide x 8' long x 8' high.