New search | Used TURBINE

31 Items Returned Go To Page: 1 2
		Stock Number	Product	Sub Group	Capacity	Description
Select		20770	TURBINE		2540	UNUSED 4120 HP, Worthington steam turbine, inlet 700 psig @ 725 deg F, exhaust 4" Hg, 11300 rpm. Includes complete lube and seal oil console.
Select		20975	TURBINE	STEAM	1190	1190 HP Terry CS steam turbine. SN T40340-A, Mdl GHF-11-STG. Clockwise rotation. Steam in @ 700 psi, 775 deg F. Exhaust at 4" Hg A. 3560 rpm.
Select		26265	TURBINE	STEAM	2785	2,785 HP Terry steam turbine. Mdl F-7, SN 33696. 4820 rpm. Steam Inlet - 40 psig, 287 deg F (dry & saturated). Exhaust 3" HG A. Rotation - Counterclockwise viewed from governor end.
Select		38005	TURBINE	GAS	2460	2,460 HP Worthington gas expander turbine. Mdl 45BB6, Frame 4S, SN 25650, Shop Order #U-14673. 8016 rpm. Inlet 103.5 psia @ 1000 deg F, exhuast 14.9 psia. (4) rateau stages. CCW rotation from thrust end of expander. Casing: steam end-chrome moly; exhaust end-cast steel. Includes gear reducer. Max pressure 125 psi, max flow 47600 lbs/hr.
Select		38006	TURBINE	GAS	1600	1,600 HP Worthington CS tailgas expander. Mdl 4U, SN 30450, Shop Order #U-18256. 4-stages. Gas inlet 104.7 psia @ 900 deg F, exhaust 15 psia, 10324 rpm. CCW rotation from governor end. Drives Clark centrifugal compressor.
Select		38086	TURBINE	STEAM	1500	1,500 HP Worthington non-condensing steam turbine, Mdl 1S. Rated inlet 550 psi, exhaust 65 psi, 10324 rpm. Single stage. 4" inlet, 12" exhaust. Woodward PG-PL governor. Trip speed 11550 rpm. Drives centrifugal compressor. Steam rate at 1500 HP = 24.8 #/HP hr.
Select		38087	TURBINE	STEAM	2000	2,000 HP Worthington steam turbine. Mdl SU2, SN 25696, Shop #U-14703. Rated inlet 575 psi @ 484 deg F; exhaust 60 psi. 8,016 rpm. CCW rotation from governor. Stages: 1-Curtis, 2-Ratean. Woodward direct acting PG-DD governor. Trip setting 8800 rpm; critical speed 4992.
Select		43673	TURBINE	GAS	7500	****7500 HP General Electric Industrial Frame 3 single shaft gas turbine. Mdl 3001. Drive rated 7500 HP @ 6900 rpm, Nema conditions of 80 deg F and 1000' altitude w/zero duct losses. Unit is an indoor unit, burning natural gas. Has the following base mtd accessories: starting turbine and clutch; dual lube oil cooler w/transfer valves; dual oil coolers w/transfer valves; accessory gear w/main gear driven lube oil pump; auxillary lube oil pump; emergency DC lube oil pump; gas fuel system including gas strainer mtd off base; inlet filter; inlet silencer; exhaust silencer. Unit can be converted to #2 distillate if required.
Select		47085	TURBINE	STEAM	3720	3,720 HP Elliott steam turbine casing. SN H3734, Mdl M-2EPG-3. 4140 rpm, inlet 650 psi, exhaust 75 psi. 5300 rpm trip speed. "E" line turbine.
Select		49660	TURBINE	STEAM	1200	1200 HP Terry horiz cast iron steam turbine. SN 36419, Mdl GAF-5. 150 psi inlet @ 450 deg F. Exhaust 4" Hg abs. 5-stage. 24" top exhaust, 8" inlet. Clockwise rotation. 4475 rpm. Factory re-rate to 2000 HP, 160 psi @ 450 deg F avail at addl cost.
Select		81165	TURBINE	STEAM	11495	11,495 HP steam turbine. Mfd by Turbodyne, SN 36377, Mdl #U-25575. Single stage. 13506 rpm, rated 1150 psi steam @ 890 deg F, 550 psi exhaust. Includes spare parts. Electronic governor included.
Select		81166	TURBINE	STEAM	11495	11,495 HP steam turbine. Mfd by Turbodyne, SN 36376, Mdl #U-25575. Single stage. 13506 rpm, rated 1150 psi steam @ 890 deg F, 550 psi exhaust. Includes spare parts. Electronic governor included.
Select		86098	TURBINE	STEAM	10695	10,695 HP General Electric single automatic extraction non-condensing steam turbine. SN 139844, Type H-NCOND, Mdl DRX19. 10-stages. 5700 rpm. Inlet pressure 1250 psi, 900 deg F. Max steam flow 350,000 lb/hr. Controlled extraction @ 465 psi, 750 deg F. Extraction max 250,000 lbs/hr. Exhaust pressure 60 psig.
Select		94656	TURBINE		9130	****9,130 HP Siemens Mdl K1100, condensing turbine. Rated speed 4230 rpm, steam consumption 9.9 lb/BHP/hr, inlet pressure normal 190 psig, inlet temp max 480 deg F, exhaust pressure 1.7 psia. Total flow 83000 lbs/hr.
Select		94657	TURBINE	STEAM	8360	****8,360 HP Siemens Mdl HG32, back pressure turbine. Rated speed 9615 rpm, steam consumption 13.2 lb/BHP/hr, inlet pressure normal 1800 psig, inlet pressure max 1850 psig, inlet temp normal 940 deg F, inlet temp max 965 deg F, exhaust pressure normal 205 psig @ 480 deg F, exhaust pressure max 215 psig. Total flow 106900 lbs/hr.
Select		94660	TURBINE	STEAM	9130	****9,130 HP Siemens Mdl K1100, condensing turbine. Rated speed 4230 rpm, steam consumption 9.9 lb/BHP/hr, inlet pressure normal 190 psig, inlet pressure max 210 psig, inlet temp max 480 deg F, exhaust pressure 1.7 psia. Total flow 83000 lbs/hr.
Select		94661	TURBINE	STEAM	8360	****8,360 HP Siemens Mdl HG32, back pressure turbine. Rated speed 9615 rpm, steam consumption 13.2 lb/BHP/hr, inlet pressure normal 1800 psig, inlet pressure max 1850 psig, inlet temp normal 940 deg F, inlet temp max 965 deg F, exhaust pressure normal 205 psig @ 480 deg F, exhaust pressure max 215 psig. Total flow 106900 lbs/hr.
Select		94665	TURBINE		13678	****13,678 HP Siemens Mdl HG40, back pressure turbine. Rated speed 5660 rpm, steam consumption 13.55 lb/BHP/hr, inlet pressure normal 1800 psig, inlet pressure max 1850 psig, inlet temp normal 940 deg F, inlet temp max 965 deg F, exhaust pressure normal 205 psig @ 480 deg F, exhaust pressure max 215 psig. Total flow 148200 lbs/hr.
Select		108285	TURBINE	STEAM	1280	1280 HP General Electric condensing steam turbine, Model DRM-25. 6" inlet with 600# flange. 20" top exhaust, CCW rotation.
Select		110639	TURBINE	STEAM	1320	Murray steam turbine. Serial# 4689-B, Type UV, Frame# 142UV9. 1320 hp, 3250 rpm, 3750 trip rpm. 600 psi inlet pressures, 740 deg. F inlet temp. Exh press 4" -G, absolute, 1452 hp max. 1900 rpm first critical speed.
31 Items Returned Go To Page: 1 2