 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
| 13 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 19620 | VOTATOR | | | Crepaco 3-cylinder 304 SS votator, swept surface heat exchanger. SN D32773XHD748, blt 1984. Cylinder #1: marked heat tube, NB #545, SN S484. MAWP 150 psi @ 366 deg F, min AT 32 deg F @ 150 psi, -6 Hg vac. Volume 2.6 cu ft. UCS66C2-12AP343519. Hydraulic motor - H.P.I. Nichols, Mdl R2A-168-16T30B, SN H30030-H. Cylinder #2: marked cooler tube, NB #5771, SN S506. MAWP 150 psi @ 360 deg F, min AT -20 deg F @ 150 psi, 6 Hg vac. Volume 1.1 cu ft. UCS66C2-12AP347607. Hydraulic motor Mdl R2A-168-16T30B, SN C840189. Cylinder #3: marked cooler tube, NB #5690, SN S457. MAWP 150 psi @ 360 deg F, min AT -20 deg F @ 150 psi, -6 Hg vac. UCS66C2-12AP34760. Mydraulic motor Mdl R2A-253-20T30B, SN C840154. Unit does not include hydraulic powerpak. |
|
|
| 41385 | VOTATOR | | 18 | 18 sq ft 316SS sanitary, Crepaco 3-tube horiz scraped surface heat exchanger. Mdl 3HD-648. Unit has (3) horiz jkt tubes, each rated full vac int, 150 psi @ 357 deg F jkt. SN for each tube is #7158, 7159, 7157. Tubes are 48" long, 6 sq ft each. Int rotors belt driven by 10 HP motors mtd under each tube. Skid mtd design w/SS housing around entire unit. |
|
|
| 72013 | VOTATOR | | 9 | 9" dia x 6' long DeLaval 316SS scraped surface heat exchanger. SN 495NPC, Mdl 6x9. 14 sq ft. Belt driven by 5 HP, 3/60/230/460 volt, 1160 rpm TEFC motor. |
|
|
| 72017 | VOTATOR | | 9 | 9" dia x 6' long DeLaval 316SS scraped surface heat exchanger. SN 480NPC, Mdl 6x9. 14 sq ft. Belt driven by 5 HP, 3/60/230/460 volt, 1160 rpm TEFC motor. |
|
|
| 72018 | VOTATOR | | 9 | 9" dia x 6' long DeLaval 316SS scraped surface heat exchanger. SN 501/1PC, Mdl 6x9. Belt driven by 5 HP, 3/60/230/460 volt, 1160 rpm TEFC motor. |
|
|
| 72019 | VOTATOR | | 9 | 9" diameter x 6' long, Inconel contact, 316SS, scraped surface heat exchanger. SN 508 NPC, Model # 6x9. Designed to be belt driven with a 17" dual belt sheave. Alloy internal scrapers. Top product outlet 2" sanitary. Jacket inlets and outlets are 2.5" NPT, with outer treads for vertical plate mounting. |
|
|
| 72020 | VOTATOR | | 9 | 9" dia x 6' long, 316SS scraped surface heat exchanger. Manufactured by DeLaval Contherm,SN 042 NPC, Model 6x9. Surface area 9 SQ FT. Designed to be belt driven, drive end with a 17" dual belt sheave. Product outlet 2", Jacket inlets & Outlets are 2". Fittings sanitary. Alloy scrapers. |
|
|
| 72021 | VOTATOR | | 9 | 9" diameter x 6' long , Inconel contact, 316SS , scraped surface heat exchanger. Manufactured by DeLaval Contherm , SN 536/NPC, Model 6x9. Designed to be belt driven by a 7.5 hp electric motor. Drive end has 17" dual belt sheave. Internal scrapers are Alloy. |
|
|
| 72022 | VOTATOR | | 9 | 9" dia x 6' long , chrome plated scraped surface heat exchanger. Manufactured by DeLaval Contherm, Model 6x9. Designed to be driven by a 7.5 hp, electric motor. Internal scrapers alloy. |
|
|
| 73418 | VOTATOR | | 6 | 6" dia x 48", 304SS votator. Mfd by Cherry Burrel, SN 5408, Mdl MM41W. 6.2 sq ft. Driven by 10 HP, 3/60/220/440 volt, 1140/945 rpm drip-proof motor. Has 1 1/4" x 1 1/4", 304SS rotary gear pump driven by 2 HP, 3/60/220/440 volt, 1725 rpm motor. Mtd on SS stand w/controls. |
|
|
| 87187 | VOTATOR | | | 0.7 sq ft votator scraped surface heat exchanger. SN 6546, Mdl #3141W. Mtd on SS cabinet w/Reeves speed controls. |
|
|
| 87188 | VOTATOR | | | 0.7 sq ft votator scraped surface heat exchanger. SN 6546, Mdl #3141W. Mtd on SS cabinet w/Reeves speed controls. |
|
|
| 108039 | VOTATOR | | 102 | 102 square feet 304SS/CS jacket scraped surface heat exchanger. Manufactured by Richard M Armstrong, Serial #A8431841, National Board #8206. Shell side rated 150 psi @ 250 degree F, jacket rated 150 psi @ 250 degree F. Has 12" diameter x 32'6" scraped chamber. Packing gland on shaft. Flat CS head. X-joint. Openings: jacket 2-8"; shell 2-6". Unit chain driven by 3 HP, 3/60/230/460 volt, 1730 rpm TEFC motor thru Dodge gear reducer, Model #TR300A, rated 38.4:1 ratio. |
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|