 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
| 13 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 206618 | WATER TREATMENT | | 56 | 56 GPM, US Filter Type 38 mixed bed Water Softner, Model MB 3096, Type 38 controller, S.O. # 511151, with (2) 30" x 96" beds, one cation resin, one anion resin, rated 100 psi. With Control Panels. |
|
|
| 212509 | WATER TREATMENT | | 13 | 13 GPM, Penfield Reverse Osmosis water treatment system, Model R4-2M6A17-7.5 M.MP, Serial number 87A3111, with (6) 4" diameter x 92" long filtration tubes. Skid mounted with a Tankaflow pump, 304SS, Model SS1832B-12400, Serial number 4878325, mechanical seal on shaft direct driven by a US Motor, High Effeciency, 3/60/240/460V 3165 rpm, 5 HP. Overall dimensions 120" long x 36" wide x 80" high. |
|
|
| 212648 | WATER TREATMENT | | 0 | Silmas Pure Steam Generator (1.4435) SS 316 L, type PSG 404 DTS, serial number 4857, industrial steam pressure 10 bar. Feed water 5/5,5 bar @ 146 degrees C, flow-rate 800 l/h. Black steam, 4,5 bar. |
|
|
| 212649 | WATER TREATMENT | | 0 | Silmas Pure Steam Generator (1.4435) SS 316 L, type PSG 404 DTS, serial number 4856, industrial steam pressure 10 bar. Feed water 5/5,5 bar @ 146 degress C, flow-rate 800 l/h. Black steam 4,5 bar. |
|
|
| 213229 | WATER TREATMENT | | 8 | 8 GPM Culligan Rerverse Osmosis filter, with (4) RO filter tubes, 4" diameter x 88" long, skid mounted with (3) 8" diamter x 24" high, SS Cartrige filters, and (1) US Filter Tank. |
|
|
| 213230 | WATER TREATMENT | | 0 | Aquafine UV water Purifier. |
|
|
| 213572 | WATER TREATMENT | | 100 | 100 gpm, water softening system manufactured by Design Engineers.(service by Culligan). Model # BA 90-1. Two 30 gallon, 12" diameter x 66" straight side softener regenerators with Brunner-matic valves, (1.5" piping connections), and one 75 gallon, 24" diameter x 36" high brine storage tank. With removable top for salt addition. Rated for 25-100 psi, Max. continuos flow at 25 gpm at 15 psi. 90,000-60,000 Grains. Backwash flow rate is 50 gpm. |
|
|
| 213945 | WATER TREATMENT | | | FRP construction, Park Technologies, Water Softner system, Rated Maximum Pressure 150 PSIG @ 120 degrees F. Part No. RT 1354. With Cation and Anion tanks and (3) Carbon filter bed tanks. Electronic controls. Each tank is approx 12" diameter x 48" high. |
|
|
| 218734 | WATER TREATMENT | | 600 | 600 gallon CS/Rubber Lined Water Softner Tank, 48" diameter x 6' straight side, dished top and bottom. |
|
|
| 218735 | WATER TREATMENT | | 600 | 600 gallon CS/Rubber Lined Water Softner Tank, 48" diameter x 6' straight side, dished top and bottom. |
|
|
| 218747 | WATER TREATMENT | | | Wallace & Tiernan Batch Polymer additive tank, Polypropylene construction, approx. 60" x 60" x 60" high polypropylene tank, with CS reinforcing. Pennwalt (Wallace & Tiernan) control for moitoring polymer addition. |
|
|
| 218748 | WATER TREATMENT | | | Wallace & Tiernan Batch Polymer additive tank, Polypropylene construction, approx. 60" x 60" x 60" high polypropylene tank, with CS reinforcing. Pennwalt (Wallace & Tiernan) control for moitoring polymer addition. |
|
|
| 218784 | WATER TREATMENT | | 0 | 1.6 MM gallon, 8000 LB/Day Average B.O.D. per day design condition, waste water treatment plant. Designed to handle chemical and sanitary waste water. This waste treatment facility is designed to operate continously with large capacity reserve tanks that accept wastewater and hold prior to treatment. The site also includes emergency storage capacity. This wastewater facility is operated by a state-of-the-art control system. The control building houses the control room, water lab, offices, break room, and conference room. Pretreatment facilites consist of a low Ph Neutralization by calcium carbonate. Agitated pits with capacity for pumping neutralization, lime slaking and storage are available at the neutralization site. The treatment portion of the facility includes teh following major componets: 2,250,000 gallon Equualization tank, 250,000 gallon primary clarifier with 6 electric airators, 125,000 gallon effleuent holding capacity; 265,000 gallon seconday clarifier, 190,000 gallon sludge thickening vessel; sludge presses and off loading station. |
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|