Quote Contents:

Top Equipment Categories

Contact IPP

Call USA:+1 (609) 586-8004
UK: +44-1642-367910
DEU: +49-30-65-942445


  • Do you know that each of our sales staff has an average of over 25 years of process / chemical plant equipment experience? 

  • We have a significant amount of inventory online—in fact we have over 15,000 pieces online. Due to the nature of our daily business of buying and selling, not all of our equipment is listed on our site.

  • If you would prefer, let us spend our time searching for the equipment that is suitable for your needs and we will send you a quote.

  • Fill out our form with specifications and as much information regarding the project, process or piece that you are interested in. We will assign your request to a salesperson right away and have them follow-up with you directly. 

Click here to open and fill out a request or continue below to search our inventory.

48 diameter inches ferrum basket centrifuge ; auto discharge-bottom
( 1200 diameter mm ferrum basket centrifuge ; auto discharge-bottom)

IPPE Stock Number: 208418

Equipment Category CENTRIFUGE
Sub Group BASKET
Product Description 1250mm diameter x 600mm deep 316L s/steel (1.4435) Ferrum basket centrifuge with Titus cyclone cake discharge system. Complete centrifuge and discharge system is gas-tight design. Manufactured by Ferrum, Serial Number 47-1321, 1250mm diameter x 600mm deep perforated basket, pressure rated 1.96 Sqm, 0 to 950 upm, 480 kg, 316L s/steel housing and cover, pressure rated 1.6 bar @ 120 degrees C. Top cover has 100mm sightglass with light, 225mm sightglass, 75mm wash pipe, 75mm feed pipe, 45mm, 80mm, and a 1/2 hinged cover; 150mm filtrate outlet. Unit has top entering feed and wash pipes and has a hydraulic knife for cake removal from basket walls. Cake is pneumatically removed from the centrifuge though a Krauss Maffei, Titan cyclone dryer, which pulls the cake out through the top of the centrifuge. Centrifuge basket is belt driven with an 11 KW luemann & Uhlman motor, EExeII 3 phase 50 cycle motor. Complete system includes a 630 liter SS horizontal mother liquor tank manufactured by Edak, Serial number 965/1, rated 1.6 bar, Krauss Maffei solvent condensor manufactured by J Engelsman, Serial Number 15641/2, miscellanous centrifugal pumps, K-M Titus cylone discharge system with 2,880 CuM/Hr, SS suction fan driven by a 30 KW, 3 phase 50 cycle EExeII motor, 385 liter 1.4571 SS cake cyclone, 692 mm diameter x 450 mm ss with 1100 mm cone, discharging the cake into a 500 liter 1.4435 SS jacketed product receiver, manufactured by Hanag, rated -1/2 bar @ -30 to 200 degrees C internal; 6 bar @ -30 to 200 degrees C in the 1/2 pipe coil jacket, with bolted dished top, cone bottm, 1/2 pipe coil jacket on cone bottom, 1000mm diameter x 342 mm straight side with 682 mm deep cone bottom. Entire system is sealed and designed for use in Solvent processes. Previous use allowed solvent ladened product cake to be dryed using ambient temerature in the cyclone air flow before being collected in the product bin.


Call us at +1 609 586 8004 or CONTACT US